Panasonic KXMB1530SP Operating Guide

Setting the connecting tone
MBNM4NM1NM6N

If you often have trouble when sending faxes, this feature allows you to hear
connecting tones: fax tone, ring back tone and busy tone. You can use these
tones to confirm the status of the other party’s machine.
M0N “OFF”: Deactivates this feature.
M1N “ON” (default): You will hear connecting tones.

Note:
R If the ring back tone continues, the other party’s machine may not be a fax

machine or may have run out of paper. Check with the other party.

R The connecting tone volume cannot be adjusted.

Making fax transmission
faster
MBNM4NM1NM7N
(KX-MB1520G/KX-MB1530G
only)

This feature is available when the transmitting/receiving machines are
compatible.
M0N “OFF” (default): Deactivate this feature.
M1N “ON”: The fax transmission speed will be faster.

Setting the maximum fax
speed
MBNM4NM1NM8N

M1N “14.4kbps”
M2N “33.6kbps” (default)

Note:
R The fax speed maybe lower than the selected speed depending on your line.

Setting the quick scan mode
MBNM4NM1NM9N
(KX-MB1530 only)

M0N “OFF” (default): Deactivates this feature.
M1N “ALWAYS”: The unit will scan the document and store it into memory first,
then the unit will start sending the documents.

Confirming the destination
before sending a fax
MBNM4NM2NM0N

M0N “OFF” (default): Deactivates this feature.
M1N “ON”: You can send a fax after confirming the destination. When the
displayed destination is correct, press MStartN to send the fax.

Setting dial keypad entry
restriction
MBNM4NM2NM1N

M0N “OFF” (default): Deactivates this feature.
M1N “ON”: If you do not wish to dial a fax number manually using the dial keypad,
activate this feature.

Note:
R If you select “ON”, you cannot make redial calls to fax numbers entered

using the dial keypad.

R If you select “ON”, the fax number re-entry setting (feature #422 on

Setting the fax number
re-entry before sending 
MBNM4NM2NM2N

M0N “OFF” (default): Deactivates this feature.
M1N “ON”: If you dial a fax number manually using the dial keypad, you have to
re-enter the number and press MStartN. When the 2nd entry number matches
the 1st entry number, you can send the fax.

Setting auto reduction
feature
MBNM4NM3NM2N

To receive a fax document that is longer than your recording paper.
M0N “OFF”: Deactivates this feature.
M1N “ON” (default): The unit will fit received documents onto your recording
paper.

61