Panasonic KXTCD220G Operating Guide
Useful Information
55
Troubleshooting
If you still have difficulties after following the instructions in this section, disconnect the AC adaptor and
turn off the handset, then reconnect the AC adaptor and turn on the handset.
turn off the handset, then reconnect the AC adaptor and turn on the handset.
Initial settings
Problem
Cause & solution
w
is flashing.
L
The handset is not registered to the base unit. Register it
(Seite 48).
(Seite 48).
L
The handset is too far from the base unit. Move closer.
L
The AC adaptor is not connected. Check the
connections.
connections.
The handset display is blank.
L
The handset is not turned on. Turn the power on (Seite
10).
10).
The handset will not turn on.
L
Make sure that the batteries are installed correctly (Seite
9).
9).
L
Fully charge the batteries (Seite 9).
L
Clean the charge contact and charge again (Seite 9).
TCD220G(e-g).book Page 55 Thursday, January 20, 2005 11:43 AM