Panasonic KXTCD220G Operating Guide
Useful Information
56
Telephone
Problem
Cause & solution
I cannot make or receive calls.
L
The AC adaptor or telephone line cord is not connected.
Check the connections.
Check the connections.
L
If you are using a splitter to connect the unit, remove the
splitter and connect the unit to the wall socket directly. If
the unit operates properly, check the splitter.
splitter and connect the unit to the wall socket directly. If
the unit operates properly, check the splitter.
L
Disconnect the base unit from the telephone line and
connect the line to a known working telephone. If the
working telephone operates properly, contact our service
personnel to have the unit repaired. If the working
telephone does not operate properly, contact your service
provider.
connect the line to a known working telephone. If the
working telephone operates properly, contact our service
personnel to have the unit repaired. If the working
telephone does not operate properly, contact your service
provider.
L
The call bar feature is turned on. Turn it off (Seite 23).
L
You dialled a call restricted number (Seite 28).
L
The key lock feature is turned on. Turn it off (Seite 12).
The unit does not ring.
L
The ringer volume is turned off. Adjust the handset ringer
volume (Seite 21) and the base unit ringer volume (Seite
26).
volume (Seite 21) and the base unit ringer volume (Seite
26).
L
The batteries should be charging but
the battery icon does not change.
the battery icon does not change.
L
Clean the charge contact and charge again (Seite 9).
L
The AC adaptor is disconnected. Plug in the AC adaptor.
A busy tone is heard when {C} is
pressed.
pressed.
L
The handset is too far from the base unit. Move closer
and try again.
and try again.
L
Another handset is on an outside call. Wait for the other
user to complete the call.
user to complete the call.
Static is heard, sound cuts in and out.
Interference from other electrical units.
Interference from other electrical units.
L
Locate the handset and the base unit away from other
electrical appliances.
electrical appliances.
L
Move closer to the base unit.
The handset stops working while being
used.
used.
L
Disconnect the AC adaptor and turn off the handset.
Connect the AC adaptor, turn on the handset and try
again.
Connect the AC adaptor, turn on the handset and try
again.
While storing an entry in the
phonebook or assigning a one touch
dial, the handset starts to ring.
phonebook or assigning a one touch
dial, the handset starts to ring.
L
A call is being received. To answer the call, press {C}.
Programming will be cancelled. Start again.
Programming will be cancelled. Start again.
Pressing {R} does not display/dial
the last number dialled.
the last number dialled.
L
The redialled number was more than 24 digits long.
Redial the number manually.
Redial the number manually.
The handset beeps intermittently
and/or 7 flashes.
and/or 7 flashes.
L
Fully charge the batteries (Seite 9).
I fully charged the batteries, but 7
still flashes.
still flashes.
L
Clean the charge contact and charge again (Seite 9).
L
It is time to replace the batteries (Seite 10).
Caller information is not displayed.
L
You must subscribe to Caller ID service.
TCD220G(e-g).book Page 56 Thursday, January 20, 2005 11:43 AM