Panasonic DMR-ES30V Operating Guide

VQT0P03

≥Mode (Recording mode)

XP

,.SP,.LP,.EP,.FR (l 23)

^------------------------------------J
You can also press [REC MODE] to change the recording 
mode.

≥Programme Name

Press [

2, 1] to select “Programme Name” and press [ENTER] 

[4]

≥Make sure that the timer recording has been programmed 

correctly on the TIMER RECORDING screen (

≥“Invalid Entry” is displayed when you enter the wrong item.

Re-enter the item.

≥To continue programming

Select “New Timer Programme” and repeat steps 2–4.

[5]

≥“

” lights on the DVD unit’s display. 

The timer recording standby mode is activated on DVD. 
However, the unit may not be turned off automatically.
≥You can play a DVD-RAM on DVD, play or record on VHS even if 

the timer recording standby mode is activated on DVD.

≥Timer recording can be started whether the unit is turned on or off.

[6]

≥If the timer recording is started with keeping the unit turned on, 

the unit is not turned off automatically even after the timer 
recording is completed. You can turn the unit off during timer 
recording.

∫ To release the unit from recording standby

“

” goes out.

≥Be sure to press [

, TIMER] before the programme start time to 

put the unit on recording standby. Timer recording will work only if 

“

” is displayed.

∫ To cancel recording when recording has already 

≥You can also press and hold [∫] on the DVD main unit for more 

than 3 seconds to stop recording.

Note
≥“

” flashes for about 5 seconds when the unit cannot go to timer 

recording standby (non-recordable disc or protected disc, etc.). 
Check the disc carefully.

≥If the unit is not put in the timer recording standby mode at the 

latest 10 minutes before the programmed timer recording starting 

time, the “

” flashes on the unit display. In this case, press 

[

, TIMER] to put the unit in the timer recording standby mode.

≥When you programme successive timer recordings to start 

immediately one after the other, the unit cannot record the part at 
the beginning of the later programmes [a few seconds when 
recording with DVD-RAM and approximately 30 seconds when 
recording with DVD-R, DVD-RW (DVD-Video format) and +R].

Even when the unit is turned off, you can display the timer recording 
list by pressing [PROG/CHECK].

Preparation
≥Press [DVD].

[1]

A)

¥

Currently recording

W Programmes are overlapped. Recording of the programme with 

the later start time starts when the earlier programme finishes 
recording.

F The disc was full (not enough space).

The TV programme may not be recorded due to copy-protect.

X Recording stopped. (Dirty disc, etc.)

B)

Recordable

# (Date): The last day of daily or weekly recording.
!:

It may not be possible to record because:
≥the disc is write-protected
≥there is no more space left
≥the number of possible titles has reached its maximum.

[2]

3, 4] to select the programme.

≥You may also select programme by inputting a 2-digit number 

using the numeric buttons.
e.g.:

“5”:

[0] 

)[5]

“15”:

[1] 

)[5]

≥Press [2, 1] to move to the preceding or following page.

[3]

¢, CANCEL] to delete, or press [ENTER] 

≥You cannot delete or change programmes that are currently 

recording.

[4]

3, 4, 2, 1] to change and press [ENTER].

≥To continue changing programmes steps 2–4.

[5]

≥“

” lights on the DVD unit’s display.

The timer recording standby mode is activated on DVD. 
However, the unit may not be turned off automatically.
≥You can play a DVD-RAM on DVD, play or record on VHS even if 

the timer recording standby mode is activated on DVD.

≥Timer recording can be started whether the unit is turned on or off.

[6]

≥If the timer recording is started with keeping the unit turned on, 

the unit is not turned off automatically even after the timer 
recording is completed. You can turn the unit off during timer 
recording.

For your reference
≥Programmes that failed to record are deleted from the timer 

recording list at 4 a.m. 2 days later. 

A

B

M7620(GN).book  27 ページ  ２００５年５月２５日　水曜日　午後１２時２分