Panasonic DMR-ES30V Operating Guide

VQT0P03

Recording, Timer recording, Transfer (dubbing), External input 

DVD Picture

≥The timer programme is incorrect or different timer programme times overlap. Correct the 

programme.

≥The clock is not correct. Set the clock.
≥The unit is not on timer recording standby. (“

” on the unit’s display is not on.) 

Press [

, TIMER].

27, 53

26, 52

∫, STOP] is 

≥Press [

, TIMER] to turn “

” off. Recording stops.

≥If you start recording immediately after turning on the unit while “Quick Start” is set to “On”, 

you cannot then stop recording for a few seconds.

26, 52

≥The timer programme remains if set to daily or weekly.

26, 53

Cannot transfer (dub) VHS to 
DVD.

≥The write-protect tab on the cartridge is set to “PROTECT” or the disc is protected with “DISC 

MANAGEMENT”.

≥TP channel is not selected on DVD when recording from a video tape to a disc. Select TP 

channel.

≥Some video tapes on the market (including rental videos) are copy-protected to prevent illegal 

reproductions. Copy-protected video tapes cannot be properly recorded.

≥You cannot use the transfer (dubbing) function when the FUNCTIONS window, the timer 

recording list screen, the VHS FUNCTIONS menu screen, etc. are displayed.

–

–

≥A video cassette without the accidental erasure prevention tab is inserted. Use a video 

cassette with an accidental erasure prevention tab.

≥DC channel is not selected on VHS when recording from a disc to a video tape. Select DC 

channel.

≥Some DVDs on the market (including rental DVD) are copy-protected to prevent illegal 

reproductions. Copy-protected DVDs cannot be properly recorded.

≥You cannot use the transfer (dubbing) function when the FUNCTIONS window, the timer 

recording list screen, the VHS FUNCTIONS menu screen, etc. are displayed.

–

–

≥The sound level on DVD and VHS may not match depending on the disc. When the sound 

level in a particular part of the sound source is soft or loud, the sound may be recorded softly 
or loudly on a video tape.

–

≥The device in playback is interfering with the TV because the device is too close to the TV. 

Move the device away from the TV.

–

≥The external device is not correctly connected.
≥The proper external input channel (AV1, AV2 or AV3) is not selected.

∫  DVD

≥Select “Automatic” in “On-Screen Messages” in the SETUP menu.

≥Select “On” in “Grey Background” in the SETUP menu.

≥Use the TV to change the aspect. If your TV does not have that function, set “Progressive” in 

the Picture menu to “Off”.

≥Check the settings for “TV Aspect” in the SETUP menu.

≥Set “Playback NR” in the Picture menu to “Off”.

≥Set “Progressive” in the Picture menu to “Off”. This problem is caused by the editing method 

or material used on DVD-Video, but should be corrected if you use interlace output.

≥The effect cannot be seen with certain types of video.

–

M7620(GN).book  71 ページ  ２００５年５月２５日　水曜日　午後１２時２分