Panasonic DMRE100HEG Operating Guide

∫ Advanced Operations

Preparation
≥Press [HDD] or [DVD] to select the recording drive. (page 13)
≥Release protection (disc 

# page 31, cartridge # page 64). [RAM]

≥Confirm there is sufficient empty space for recording on the HDD. 

(page 20)

For your reference
≥Select the “TV System” (PAL/NTSC) of the programme you wish 

to record (page 55).

≥About recording from DV equipment

- We recommend connecting one piece of DV equipment at a 

time.

- When recording from DV equipment, you can determine the 

audio setting at “Audio Mode for DV Input”. (page 54)

[HDD] [RAM] [DVD-R]
When connected to DV equipment/non-DV equipment
Connect the other equipment to this unit’s input terminals 
(page 51).
≥Use a DV cable to connect the DV equipment.

[1] Press [REC MODE] to select the 

 (page 20)

≥It is also possible to perform the flexible recording (FR). 

[2]

W, X] or [INPUT SELECT] to 

≥Select AV1, AV2, AV3, AV4 or DV.

[3] Start play on the other equipment.
[4] Press [

¥, REC] at the point you want 

ªTo skip unwanted parts

Press [

;, PAUSE] to pause recording. (Press again to restart 

recording.)

Note
≥Stop play on the other equipment as well.
≥This unit does not support recording the signal from a personal 

computer.

≥When recording bilingual programmes

- When “M1” and “M2” is selected on the connected equipment, 

you can choose the audio mode in playback. However, when 
you record SD VIDEO (MPEG4) to HDD simultaneously, select 
“M1” or “M2” on the connected equipment. 

[HDD] [RAM]

- Select “M1” or “M2” on the connected equipment. (You cannot 

select the audio mode in playback.)

 [DVD-R]

For your reference
≥Almost all videos and DVD software on sale have been treated to 

prevent illegal copying. These software cannot be recorded.

[HDD] [RAM]

Preparation
≥Connect the DV equipment to the DV input terminal on the front 

panel. (page 51)

≥Pause play of the DV equipment at the point you want recording 

to start.

[1] Press [REC MODE] to select the 

 (page 20)

[2]

 (page 23)

[3] Use [

3, 4, 2, 1] to select “DV AUTO 

[4] Use [

2, 1] to select “Rec” and press 

DV AUTO REC screen appears.
≥Recording starts.

ªWhen recording finishes

The confirmation screen appears. Press [ENTER] to finish DV auto 
recording.

For your reference
≥Do not operate the DV equipment during recording since this will 

cause recording to stop.

≥When this unit detect the parts recorded by the DV equipment.

- Play lists are automatically created.
- The recording is divided into scenes.
- The date of the first recording will be the programme’s title.
- The marker is automatically registered.

≥You cannot record and play simultaneously.
≥The date and time information on the tape of the DV equipment 

will not be recorded.

≥SD VIDEO (MPEG4) programmes cannot be recorded despite 

setting “MPEG4 Rec Mode” (page 53) to “SF”, “F”, “N” or “E”.

≥You can connect only 1 DV equipment to this unit.
≥Depending on the connected DV equipment, video or audio may 

not be input properly.

Note
≥You cannot control this unit from the digital video equipment even 

if using the DV cable.

≥The DV input on this unit is for use with DV cameras only.
≥When the “DV AUTO REC” does not work:

- Check the connection and the setting.
- Turn the power off.
- Turn the power on again.
- When the problem still persists, follow the “Manual Recording” 

above.

≥The DV equipment name may not be shown correctly.

ªTo stop recording

Press [

∫, STOP].

DVD(PAL).book  49 ページ  ２００３年７月１６日 水曜日 午後３時２１分