Panasonic KXMB781 Operating Guide

Page of 96
6. Fax (KX-MB781 only)
39
2
Press {V} or {^} repeatedly to display the desired 
broadcast memory (
<BROADCAST>” or “<MANUAL 
BROAD>”). i {MENU} i {*}
3
Press {V} or {^} repeatedly to display the desired 
item you want to add. i {SET}
L
To add other items, repeat this step (up to 20 
items).
4
{
STOP}
Note:
L
When adding new items to the MANUAL 
BROADCAST memory, you can only select stored 
items.
6.4.3 Erasing a stored item from the 
broadcast memory
1
{
DIRECTORY}
2
Press {V} or {^} repeatedly to display the desired 
broadcast memory (
<BROADCAST>” or “<MANUAL 
BROAD>”). i {MENU} i {#}
3
Press {V} or {^} repeatedly to display the desired 
item you want to erase.
L
To cancel erasing, press {STOP}.
4
{
SET} i {SET} i {STOP}
6.4.4 Sending the same document to pre-
programmed parties
To send the same document using the scanner glass
1. Set the original (page 17).
2. If necessary, change to the desired resolution (page 
35) and the desired contrast (page 35).
3. Press {BROADCAST} or {MANUAL BROAD}.
L
To send a single page, skip to step 5.
L
To send multiple pages, go to the next step.
4. Place the next page. i {SET}
L
To send more pages, repeat this step.
5. {START}
L
After transmission, the unit will automatically print 
a report (broadcast sending report).
Note:
L
To stop sending, see page 61.
L
If you select 
FINE”“SUPER FINE” or “PHOTO” 
resolution, the number of pages that the unit can 
send will decrease.
L
If the document exceeds the memory capacity, 
sending will be canceled.
L
If a party is busy or does not answer, it will be skipped 
and redialed later.
To send the same document using the auto 
document feeder
1. Set the original (page 17).
2. If necessary, change to the desired resolution (page 
35) and the desired contrast (page 35).
3. Press {BROADCAST} or {MANUAL BROAD}.
MB271-781-PFQX2722ZA-OI-en.book  Page 39  Tuesday, May 22, 2007  5:20 PM