Panasonic KXFLB801E Operating Guide

Page of 98
5. Copy
44
5 Copy
Copying
5.1 Using the unit as a 
copy machine
5.1.1 Entering the copy mode
Before copying, set the operation mode to the 
copy mode.
Press {COPY} to turn the {COPY} light ON.
Note:
L
You can change the default operation mode 
(feature #463 on page 59) and the timer 
before returning to the default operation 
mode (feature #464 on page 59).
L
If the {FAX AUTO ANSWER} indicator is ON, 
the unit can receive faxes automatically even 
while in the copy mode.
5.2 Making a copy
5.2.1 Using the auto document 
feeder
L
Confirm that there are no documents on 
the scanner glass.
1
If the {COPY} light is OFF, turn it ON by 
pressing {COPY}.
2
Set the original.
1. Adjust the width of the document guides 
(
1) to fit the actual size of the document.
2. Insert the document (up to 40 pages) 
FACE UP into the feeder until a single 
beep is heard.
3
If necessary, change the following settings 
according to the type of document.
L
To select the resolution, see page 45.
L
To select the contrast, see page 45.
4
If necessary, enter the number of copies (up 
to 99).
5
Press {START}.
L
The unit will start copying.
6
After you finish copying, press {STOP} to 
reset the settings you set in step 3 and 4.
Note:
L
Any document which can be sent as a fax can 
also be copied and scanned (page 30).
The effective scanning area changes 
according to the setting of the paper size.
L
Do not open the document cover when 
making a copy with the auto document 
feeder.
{
COPY}
{
COPY}
{
STOP}
{
START}
{V}{^}
{
CONTRAST}
{
RESOLUTION}
1
FLB801E-PFQX2483ZA-en.book  Page 44  Friday, March 31, 2006  6:40 PM