Panasonic KX-PS8000 Manual
39
The printer panel provides an interface to adjust the
density of the toner applied to the media.
This feature compensates for the changes in density
that can occur as environmental conditions change,
toner cartridges or the imaging unit age. Perform the
following steps to adjust the color density:
density of the toner applied to the media.
This feature compensates for the changes in density
that can occur as environmental conditions change,
toner cartridges or the imaging unit age. Perform the
following steps to adjust the color density:
To print a Color Calibration Page:
#
Press the MENU/EXIT button on
the printer panel.
the printer panel.
$
Press the
F
button.
%
Press the ENTER button.
&
Press the
F
button 5 times and the
following is displayed.
'
Press the ENTER button.
A Color Calibration Page will be printed.
The current density setting for each color is indicated
by the line enclosure on the Color Calibration Page
as shown in the following example. The factory
default setting for each color is 0.
by the line enclosure on the Color Calibration Page
as shown in the following example. The factory
default setting for each color is 0.
Color Calibration Page:
1
Setting the Color Density
Menu Mode
Test Page
Test Page
Menu Mode
Color Calibration
Color Calibration
Color Calibration
Calibration Offset
Calibration Offset
Color Calibration
Calibration Test Print
Calibration Test Print
Setup
Setting
the
Color
Density
Current color
density settings
density settings