Panasonic KX-PS8000 Manual

Color Calibration 
Calibration Offset

Calibration Offset
0* (-5 to 5)

Color Calibration 
CYAN

Color Calibration 
Calibration Test Print

Compare the current color density
settings on the Color Calibration Page
with the color density samples on the
Color Calibration Card to see if they
match.

Place the Color Calibration Page on at least 2
sheets of clean white paper in a well-lighted
area.

B

If they match, then you do not need
to adjust the color density and you
may proceed with any operation
you wish to perform.

B

If they do not match, go to step 3.

Determine which block on the Color
Calibration Page most closely
matches the density of the cyan
sample on the Color Calibration Card.

B

Repeat step 3 for each color.

If you wish to adjust the density for all
colors simultaneously, perform the
following, then go to step 5

#

Repeat instructions 

#

through 

%

of step 1 on page 39.

$

Press the ENTER button.

%

Press the 

F

/

I

button to

darken/lighten all the colors.

Press the 

F

/

I

button twice selects the

next/previous level settings.

B

If you wish to make the density setting

darker by 2 levels:

 

Press the 

F

button 4 times.

B

If you wish to make the density setting

lighter by 1 level:

 

Press the 

I

button 2 times.

&

Press the ENTER button.

'

Press the 

F

button 4 times and the

following is displayed.

Color Calibration Card

Color Calibration Page