Panasonic KXTG1312CX Operating Guide
Why is w flashing?
L
The handset is too far form the base unit. Move closer.
L
The base unit’s AC adaptor is not connected. Check the
connections.
connections.
L
The handset registration is cancelled. Register the handset to
the base unit using the following method.
1 {j/OK}
2 {v}/{e}: “SETTING HS”
the base unit using the following method.
1 {j/OK}
2 {v}/{e}: “SETTING HS”
i
{>}
3 {v}/{e}: “REGISTRATION”
i
{>}
4 {v}/{e}: “REGISTER HS”
i
{>}
5 Press and hold {x} on the base unit for about 5 seconds.
L
If all registered handsets start ringing, press {x} to stop,
then start again from step 1.
then start again from step 1.
L
The rest of the procedure must be completed within 4
minutes.
minutes.
6 {v}/{e}: Select a base unit number.
i
{>}
7 Wait until “BS PIN” is displayed.
i
Enter the base unit PIN
(default: “0000”).
i
{>}
L
If you forget your PIN, contact your nearest Panasonic
service centre.
service centre.
L
When the handset has been registered successfully, w
stops flashing.
stops flashing.
L
If w is still flashing, start again from step 1.
TG1311_1312CX_FAQ_Leaflet.fm Page 2 Wednesday, October 8, 2008 11:36 AM