Panasonic KXFC275E Operating Guide
Important:
R Program the remote operation ID beforehand
R Program the remote operation ID beforehand
R Set the unit to TAM/FAX mode before going out
R Use a touch tone telephone for remote
operations.
6.5.1 Summary of remote operation
1
Call your unit.
2
Enter the remote operation ID during or after the
TAM/FAX greeting message.
TAM/FAX greeting message.
3
When there are new recorded messages
1. A long beep will sound.
2. Short beep(s) will sound up to 8 times.
1. A long beep will sound.
2. Short beep(s) will sound up to 8 times.
R This indicates the number of new messages.
3. New messages will be played back.
When there are no new messages
1. A long beep will sound (short beep will not sound).
2. Press M5N.
3. All the recorded messages will be played back.
1. A long beep will sound (short beep will not sound).
2. Press M5N.
3. All the recorded messages will be played back.
4
To end remote operation press M9N, then hang up.
6.5.2 Remote operation using remote
commands
commands
1
Call your unit.
2
Enter the remote operation ID during or after the
TAM/FAX greeting message.
TAM/FAX greeting message.
3
Enter a remote command within 10 seconds.
Note:
R When you press a key, press firmly.
R When you press a key, press firmly.
Key
Remote command
M1N
Repeat message (during
playback)
playback)
M2N
Skip message (during playback)
M4N
Play new messages
M5N
Play all messages
M6N
Play greeting message
M7N
Record greeting message
M9N
Stop current operation
M0N
Turn OFF auto answer setting
MGNM4N
Erase currently playing message
MGNM5N
Erase all messages
MGNM6N
Erase greeting message (during
greeting message playback)
greeting message playback)
Key
Remote command
MGNMBN
End remote operation
*1 If pressed within the first 5 seconds of a message,
the previous message is played.
*2 To resume operation, press a command key within
10 seconds.
*3 Unit resets to a pre-recorded greeting message.
Recording a marker message
After playing back the messages, you can leave an
additional message.
1. Wait for 3 beeps indicating the end of the remote
After playing back the messages, you can leave an
additional message.
1. Wait for 3 beeps indicating the end of the remote
operation.
2. Wait about 10 seconds.
3. Hear the voice guide and/or hear 1 beep.
4. Leave a message.
3. Hear the voice guide and/or hear 1 beep.
4. Leave a message.
To turn ON the auto answer setting
1. Call your unit and let it ring 10 rings.
1. Call your unit and let it ring 10 rings.
R A beep will sound.
on page 42) within 10 seconds.
R The receiving mode will be set to TAM/FAX or
R The receiving mode will be set to TAM/FAX or
FAX ONLY mode, depending on the setting of
feature #77 (page 46).
feature #77 (page 46).
3. Hang up the handset.
Note:
R You cannot turn ON the auto answer setting when the
R You cannot turn ON the auto answer setting when the
unit is set to TEL/FAX mode.
41
6. Answering Machine