Panasonic KXFC275E Operating Guide

Copy: Approx. 40 W (When copying a 20 % black
document)
Maximum: Approx. 135 W (When copying a 100 % black
document)

Power supply:

220 V – 240 V AC, 50 Hz

Fax memory capacity

Approx. 25 pages of memory transmission
Approx. 28 pages of memory reception
(Based on the ITU-T No. 1 Test Chart in standard
resolution, without using the Error Correction Mode.)

Voice memory capacity

Approx. 15 minutes of recording time

Copy memory capacity:

Approx. 10 pages (Based on the ITU-T No. 1 Test Chart
in fine resolution.)

CIS’s LED light properties:

LED radiation output: Max. 1 mW
Wavelength: Yellowish Green 570 nm typical
Emission duration: Continuous

*1 Transmission speed depends upon the contents of

the pages, resolution, telephone line conditions and

capability of the other party’s machine.

*2 Transmission speed is based upon the ITU-T No. 1

Test Chart with original mode. If the capability of the

other party’s machine is inferior to your unit, the

transmission time may be longer.

*3 If an error occurs during fax reception, such as a

paper jam or if the recording paper runs out, the fax

and subsequent faxes will be retained in memory.

*4 Recording time may be reduced by the calling

party’s background noise.

ITU-T No. 1 Test Chart

Note:
R Design and specifications are subject to change

without notice.

R The pictures and illustrations in these instructions

may vary slightly from the actual product.

Recording paper specifications
Recording paper size:
A4: 210 mm

´ 297 mm

Recording paper weight:
64 g/m

to 80 g/m

12.2.2 Cordless handset

Standard:

DECT (Digital Enhanced Cordless
Telecommunications)
GAP (Generic Access Profile)
n

Number of channels:

120 Duplex Channels
n

Frequency range:

1.88 GHz to 1.90 GHz
n

Duplex procedure:

TDMA (Time Division Multiple Access)
n

Channel spacing:

1,728 kHz
n

Bit rate:

1,152 kbit/s
n

Modulation:

GFSK (Gaussian Frequency Shift Keying)
n

RF transmission power:

Approx. 10 mW (average power per channel)
n

Voice coding:

ADPCM 32 kbit/s
n

Operating environment:

0 °C – 40 °C, 20 % – 80 % RH (Relative Humidity)
n

Dimensions:

Approx. height 158 mm

´ width 48 mm ´ depth 30 mm

Mass (Weight):

Approx. 130 g

12.2.3 Charger unit (KX-FC275 only)

Operating environment:

0 °C – 40 °C, 20 % – 80 % RH (Relative Humidity)
n

Dimensions:

Approx. height 52 mm

´ width 75 mm ´ depth 88 mm

Mass (Weight):

Approx. 60 g
n

Power consumption:

Standby: Approx. 0.2 W
Maximum: Approx. 3.2 W
n

Power supply:

AC adaptor (220 V – 240 V AC, 50 Hz)

12. General Information