Panasonic KX-MB2575 Operating Guide

#385

To set the paper type for the lower input tray.
M1N “PLAIN PAPER” (default)
M2N “THIN PAPER”

Note:
R This feature will be displayed only when the lower input tray is installed

R This setting will be deactivated when printing from a computer. To set the

#390

To set the input tray to use for lists and reports.
M1N “#1” (default): Standard input tray.
M3N “#3”: Lower input tray.
M4N “#1+#3”

*1 These options are displayed only when the paper size (feature #380 on

page 76 or feature #382 on page 77) and the media type (feature #383 on

page 77 or feature #385 on page 78) match. If either is changed, this setting

will be changed accordingly.

#403

To set the length of time before the unit enters power save mode.
M1N “1min” (default)
M2N “5min”
M3N “15min”
M4N “30min”
M5N “45min”

Note:
R During power save mode, the unit needs to preheat the fuser unit before it can

begin printing.

#462

To hold the previous contrast setting.
M0N “DISABLED” (default)
M1N “ENABLED”

Note:
R The previous setting will be held individually for copying.
R The previous setting will be held individually for sending faxes (fax supported

models only). (y)

#463

To select the default operation mode when the selected time of the mode timer
(feature #464) elapses.
M1N “COPY” (default)
M2N “FAX”

Note:
R You cannot select scan mode using this feature.

#464

To set the timer before returning to the default operation mode (feature #463).
M0N “OFF”
M1N “30s”
M2N “1min” (default)
M3N “2min”
M4N “5min”

#479

To view the count number of copies/prints for departments. See page 105 for
details.

78