Panasonic CZTAW1 Operating Guide

6

 

■

To register an additional user on the indoor unit

Multiple users (family members, for example) with different Panasonic IDs 

can access the same indoor unit.

1) Log into the service using the Panasonic ID of the 

additional user.

2) Enter the Device ID and Device password that was 

registered by the owner (the user that initially 

registered).

3) Enter a message requesting approval from the owner.

 ∙Enter a message so that the owner can identify the 

person making the request.

1) Log into the service using the Panasonic ID of the owner (the user that 

initially registered).

 ∙If there is a message requesting registration from an additional user, 

a “   ” is displayed at the top left of the Top page.

2) Select “   ”.

 ∙The request message from the additional user is displayed.

3) Select the appropriate privileges for the user and approve their request.

 ∙After approving, the additional user will also be able to use the 

AQUAREA Smart Cloud.

The lamps light and blink to notify you of the communication status and 

possible errors.

Power LED
Status LED

Link LED

Lighting: 

OFF: 

Blinking: 

1 s

 

0.2 s

LED

Status and Solution 

LED

Status and Solution 

A2W power off or cable not 

connect

LAN (IP has not been 

acquired) 

(Blue or Green Blinking)

A2W power on before soft 

wake up

LAN (IP Retrieving) 

(Blue or Green Blinking)

A2W cannot connect  

(Red Blinking)

LAN (IP collision) 

(Red and Blue or Green 

Blinking)

Immediately after startup

LAN (Server interruption)

Normal

SSID or IP specified  

(Blue or Green Blinking) 

User registration in  

(Blue or Green Blinking)

Firmware Updating  

(Red and Blue and Green 

Blinking)

Communication confirmation

Timer implementation in 

(White and Blue or Green 

Blinking)