Panasonic KXFC195GRG Operating Guide
8. Options
61
L
All the registered handset numbers are
displayed and the pre-selected handset
number flashes.
displayed and the pre-selected handset
number flashes.
7
Press the desired handset number(s).
L
The selected handset number(s) will
flash.
flash.
L
To cancel a selected handset number,
press the number again. The number will
stop flashing.
press the number again. The number will
stop flashing.
8
Press {>} or {j}.
9
Press {ih}.
Setting the selected handset(s) then all
handsets to ring
handsets to ring
1
Press {j}.
2
Press {e} or {v} repeatedly to display
“SETTING BS”.
“SETTING BS”.
3
Press {>}.
L
“INPUT CODE” will be displayed.
4
Press {1}.
5
Enter the 4-digit base unit PIN.
L
The default PIN is “0000”.
6
Press {3} to select “3”.
L
All the registered handset numbers are
displayed and the pre-selected handset
number flashes.
displayed and the pre-selected handset
number flashes.
7
Press the desired handset number(s).
L
The selected handset number(s) will
flash.
flash.
L
To cancel a selected handset number,
press the number again. The number will
stop flashing.
press the number again. The number will
stop flashing.
8
Press {>}.
9
Press the desired number of rings for the
selected handset(s) from “1” to “6”, using the
dial keypad.
selected handset(s) from “1” to “6”, using the
dial keypad.
L
The default setting is “3”.
L
The selected number of rings will be
shown on the right edge of the display.
shown on the right edge of the display.
10
Press {>} or {j}.
11
Press {ih}.
8.4 Intercom between
handsets
handsets
You can use your handsets as a 2-way intercom.
L
Keep the front cover page open for button
locations.
locations.
Example: When handset 1 calls handset 2
1. Handset 1:
Press {INT} and {2} (desired handset
number).
number).
2. Handset 2:
Press {C} to answer.
3. When finished talking, press {ih}.
Note:
L
Intercom calls can be conducted within the
radio cell of the current base unit, but not with
units in neighbouring radio cells.
radio cell of the current base unit, but not with
units in neighbouring radio cells.
8.5 Transferring calls
between
handsets/Conference call
between
handsets/Conference call
Intercom can be used to transfer an external call
between handsets that are registered to the
same base unit.
between handsets that are registered to the
same base unit.
L
Keep the front cover page open for button
locations.
locations.
Example: When handset 1 transfers a call to
handset 2
handset 2
1. Handset 1:
During an external call, press {INT} and {2}
(desired handset number).
(desired handset number).
L
If there is no answer, press {INT} to return
to the external call.
to the external call.
2. Handset 2:
Press {C} to answer the page.
L
Handset 2 can talk with handset 1.
L
The external call will be put on hold.
3. Handset 1:
To complete the call transfer, press {ih}.
OR
To establish the conference call, press {3}.
OR
To establish the conference call, press {3}.
To transfer a call directly, without speaking to
handset 2
After step 1, press {ih} on handset 1.
If the transferred call is not answered within 30
seconds, handset 1 will ring again.
handset 2
After step 1, press {ih} on handset 1.
If the transferred call is not answered within 30
seconds, handset 1 will ring again.
FC195GR.book Page 61 Wednesday, April 2, 2003 11:39 AM