Panasonic KXFC238FX Operating Guide
6. Fax
50
6.4.3 Erasing a stored item from
the broadcast memory
the broadcast memory
1
Press {>}.
2
Press {A} or {B} repeatedly to display
“
“
<BROADCAST>”.
3
Press {MENU}.
4
Press {#}.
5
Press {A} or {B} repeatedly to display the
desired item you want to erase.
desired item you want to erase.
L
To cancel erasing, press {STOP}.
6
Press {SET}.
7
Press {SET}.
L
To erase other items, repeat steps 5 to 7.
8
Press {STOP}.
6.4.4 Sending the same
document to pre-programmed
parties
document to pre-programmed
parties
1
Insert the document FACE DOWN.
2
If necessary, press {A} or {B} repeatedly to
select the desired resolution (page 47).
select the desired resolution (page 47).
3
Press {>}.
4
Press {A} or {B} repeatedly to display
“
“
<BROADCAST>”.
5
Press {FAX/START}.
L
The document will be fed into the unit and
scanned into memory. The unit will then
send the data to each party, calling each
number sequentially.
scanned into memory. The unit will then
send the data to each party, calling each
number sequentially.
L
After transmission, the stored document
will be erased from memory
automatically, and the unit will
automatically print a report (Broadcast
sending report).
will be erased from memory
automatically, and the unit will
automatically print a report (Broadcast
sending report).
Note:
L
If you select “
FINE”, “SUPER FINE” or
“
PHOTO” resolution, the number of pages
that the unit can send will decrease.
L
If the document exceeds the memory
capacity, sending will be cancelled.
capacity, sending will be cancelled.
L
If a party is busy or does not answer, it will be
skipped and redialled later up to 5 times.
skipped and redialled later up to 5 times.
To send the same document to a one-time
group of parties
group of parties
You can also select a one-time group of parties
to send the same document to. After
transmission, this group will be deleted.
to send the same document to. After
transmission, this group will be deleted.
1. Insert the document.
2. Press {>}.
3. Press {A} or {B} repeatedly to display
“
<ONE TIME BROAD>”.
4. Press {SET} to start programming the
parties you want to send the document to.
5. Press {A} or {B} repeatedly to display the
desired party.
6. Press {SET}.
L
To program other parties, repeat steps 5
and 6 (up to 20 items).
and 6 (up to 20 items).
7. Press {FAX/START} to start transmission to
the programmed parties.
To cancel broadcast transmission
1. Press {STOP} while “
BROADCASTING” is
displayed.
L
The display will show “
SEND
CANCELLED?”.
2. Press {SET}.
FC238FX-PFQX2261ZA_en.book Page 50 Monday, June 20, 2005 1:30 PM