Panasonic KXFC238FX Operating Guide

cancelled and this feature will be turned OFF 
automatically.
However this feature will not turn OFF 
automatically when:
–

you enter the number of copies, and 
memory becomes full during copying.

–

memory becomes full during enlarge, 
reduce or collate copy.

±]

If the size of the document sent by the other 
party is as large as, or larger than the recording 
paper, the unit can reduce the document and 
print it. Select the desired reduction rate.

L

The information of the sending party is 
printed on the top of each page. Therefore, 
even if the original document is the same size 
as the recording paper, the document will be 
divided into 2 sheets when printed at 
“

100%”. Select “92%” to print on 1 sheet.

±]

NORMAL” (default): For normal contrast.

DARKER”: Used when the display contrast is too 

light.

±]

If you wish to use the extension telephone (page 
53) to receive faxes, activate this feature and 
program the activation code.

1. Press {MENU}.

2. Press {#}, then {4}{1}.

3. Press {A} or {B} repeatedly to select “

ON”.

4. Press {SET}.

5. Enter your code (2 to 4 digits) using the dial 

keys {0}–{9}, {*} and {#}.

L

The default code is “@

#9”.

L

Do not enter “0000”.

6. Press {SET}.

7. Press {MENU}.

±]

To alert you when a new voice message is 
recorded. The unit beeps slowly until you listen 
to the recorded messages.
“

ON”: You will be alerted to new messages by a 

beeping sound.
“

OFF” (default): Deactivates this feature.

±]

To alert you with beeps when there is less than 
60 seconds of remaining recording time. The 
slow beeps will continue until you erase the 
recorded messages (page 61).
“

ON”: You will be alerted that you have reached 

the recording time limit by a beeping sound.
“

OFF” (default): Deactivates this feature.

±]

To alert you with a beeping sound when a 
received fax document is stored into memory 
due to some existing problem.
The slow beeps will continue until you clear the 
printing problem and make sure the unit is 
supplied with enough paper to print the stored 
document.
“

ON” (default): You will be alerted to a reception 

problem by a beeping sound.
“

OFF”: Deactivates this feature.

±]

To receive a fax automatically when you answer 
a call using the base unit and hear a fax calling 
tone (slow beep).
“

ON” (default): You do not have to press 

{

FAX/START} for fax reception.

OFF”: You have to press {FAX/START} for fax 

reception.

A4

Letter

(default)

A4

A4

A4

A4

A4

Legal

FC238FX-PFQX2261ZA_en.book  Page 68  Monday, June 20, 2005  1:30 PM