Panasonic KXFC238FX Operating Guide
9. Programmable Features
67
9.3 Advanced features
Code #22: Setting the journal report to print
automatically
automatically
AUTO JOURNAL
=ON
[
±]
“
ON” (default): The unit will print a journal report
automatically after every 30 new fax
transmissions and receptions (page 48).
“
transmissions and receptions (page 48).
“
OFF”: The unit will not print a journal report, but
will keep a record of the last 30 fax transmissions
and receptions.
and receptions.
Code #23: Sending documents overseas
OVERSEAS MODE
=ERROR
[
±]
If you cannot send a fax overseas even if the
number is correct and the line is connected,
activate this feature before sending the fax.
This feature improves the reliability by reducing
the transmission speed.
“
number is correct and the line is connected,
activate this feature before sending the fax.
This feature improves the reliability by reducing
the transmission speed.
“
ERROR” (default): When the previous fax
transmission fails and you wish to re-send the
document.
“
document.
“
NEXT FAX”: This setting is effective only for the
next attempted fax transmission. After
transmission, the unit will return to the previous
setting.
“
transmission, the unit will return to the previous
setting.
“
OFF”: Deactivates this feature.
Note:
L
This feature is not available for broadcast
transmission.
transmission.
L
Calling charges may be higher than usual.
Code #25: Sending a fax at a specific time
DELAYED SEND
=OFF
[
±]
This feature allows you to take advantage of low-
cost calling hours offered by your telephone
company. This feature can be set up to 24 hours
in advance of the desired time.
To send a document:
cost calling hours offered by your telephone
company. This feature can be set up to 24 hours
in advance of the desired time.
To send a document:
1. Insert the document.
2. If necessary, press {A} or {B} repeatedly to
select the desired resolution (page 47).
3. Press {MENU}.
4. Press {#} then {2}{5}.
5. Press {A} or {B} repeatedly to select “
ON”.
6. Press {SET}.
7. Enter the fax number.
8. Press {SET}.
9. Enter the transmission start time.
L
repeatedly to select “
AM” or “PM”.
L
If you selected 24-hour time entry when
you set the date and time (page 24), the
time is set using 24-hour time entry.
you set the date and time (page 24), the
time is set using 24-hour time entry.
10. Press {SET}.
11. Press {MENU}.
Note:
L
To cancel after programming, press {STOP}
then {SET}.
then {SET}.
Code #26: Setting the Caller ID list to print
automatically
automatically
AUTO CALL. LIST
=OFF
[
±]
“
ON”: The Caller ID list will be printed
automatically each time the base unit logs 30
different callers (page 34).
“
different callers (page 34).
“
OFF” (default): The Caller ID list will not be
printed, but the base unit will keep a record of the
information for the last 30 different callers.
information for the last 30 different callers.
Code #31: Activating the Distinctive Ring
feature
feature
DISTINCTIVE RING
=OFF
[
±]
See page 45 for details.
Code #32: Setting the ring pattern for fax
(Distinctive Ring feature)
(Distinctive Ring feature)
FAX RING PATTERN
RING=B–D
[
±]
See page 46 for details.
Code #34: Setting the quick scan
QUICK SCAN
=OFF
[
±]
This feature is helpful when you want to remove
the document for other uses, because the unit
will release the document before sending or
copying.
“
the document for other uses, because the unit
will release the document before sending or
copying.
“
ON”: The unit will scan the document and store
it into memory first, then the unit will start
sending or copying.
“
sending or copying.
“
OFF” (default): Deactivates this feature.
Note:
L
If the document exceeds the memory
capacity, sending of the whole document or
copying of the exceeded document will be
capacity, sending of the whole document or
copying of the exceeded document will be
FC238FX-PFQX2261ZA_en.book Page 67 Monday, June 20, 2005 1:30 PM