Panasonic KXFC238FX Operating Guide
9. Programmable Features
66
9.2 Basic features
Code #01: Setting the date and time
SET DATE & TIME
PRESS SET
See page 24 for details.
Code #02: Setting your logo
YOUR LOGO
PRESS SET
See page 25 for details.
Code #03: Setting your fax number
YOUR FAX NO.
PRESS SET
See page 26 for details.
Code #04: Printing a sending report
SENDING REPORT
=ERROR
[
±]
ERROR” (default): A sending report will be
printed only when fax transmission fails.
“
“
ON”: A sending report will be printed after every
transmission.
“
“
OFF”: Sending reports will not be printed.
Code #06: Changing the ring setting in FAX
ONLY mode
ONLY mode
FAX RING COUNT
RINGS=2
[
±]
To change the number of rings before the unit
answers a call in FAX ONLY mode.
You can select “
answers a call in FAX ONLY mode.
You can select “
2” (default), “3”, “4”, “5”, “6”,
“
7”, “8” or “9”.
Note:
L
Set feature #77 to “
FAX ONLY” (page 69)
beforehand.
Code #06: Changing the ring setting in
TAM/FAX mode
TAM/FAX mode
TAM RING COUNT
RINGS=2
[
±]
To change the number of rings before the unit
answers a call in TAM/FAX mode. You can select
“
answers a call in TAM/FAX mode. You can select
“
2” (default), “3”, “4”, “TOLL SAVER” or
“
RINGER OFF”. See page 55 for details.
Note:
L
Set feature #77 to “
TAM/FAX” (page 69)
beforehand.
Code #10: Changing the maximum recording
time for incoming messages
time for incoming messages
RECORDING TIME
=VOX
[
±]
“
VOX” (default): Unlimited.
“
1 MIN”–“9 MIN”: 1 minute to 9 minutes.
Code #11: Setting the remote operation ID
REMOTE TAM ID
=ON
[
±]
1. Press {MENU}.
2. Press {#}, then {1}{1}.
3. Press {A} or {B} repeatedly to select “
ON”.
4. Press {SET}.
5. Enter any 3-digit number except a number
using 0 or 7.
L
The default ID is “
111”.
6. Press {SET}.
7. Press {MENU}.
Code #13: Setting the dialling mode
DIALLING MODE
=TONE
[
±]
See page 23 for details.
Code #17: Setting the ring tone for outside
calls
calls
EXT. RINGTONE
=A
[
±]
To set the base unit ring tone from one of 3 tones
for outside calls. You can select “
for outside calls. You can select “
A” (default),
“
B” or “C”.
Note:
L
To set the handset ring tone, see page 75.
FC238FX-PFQX2261ZA_en.book Page 66 Monday, June 20, 2005 1:30 PM