Panasonic DPMB545SX Operating Guide

#578

To erase all FTP destinations and SMB folder destinations
stored in the unit.
• Disconnect the following cables before activating this

feature.
– Telephone line cord
– USB cable
– LAN cable

–

#580

To select LAN mode.

• To set this feature, make sure that:

– The unit is in standby mode.
– The document is not set to the automatic

– The delayed send feature is not activated (feature

#581

If feature #580 is set to Wireless LAN, you can check the
status of the wireless LAN connection.

–

#582

To set up the wireless LAN connection using WPS-PBC.
This feature is the same feature as pressing the  WPS
button. See page 31 for details.

–

#583

To set up the wireless LAN connection using WPS-PIN. See
page 31 for details.

–

#584

To set up the wireless LAN connection by finding the SSID
automatically on the network. See page 32 for details.

–

#585

To set up the wireless LAN connection by entering the
required information manually. See page 32 for details.

–

#586

To restore all wireless LAN connection settings.

–

#592

To set the timer of auto disconnection from Wi-Fi Direct.
Activate this feature to automatically disconnect from the Wi-
Fi Direct connection when printing is completed. This feature
is useful if you are normally printing from PCs, or sharing the
unit with other users.

You can confirm the detailed network status when a message is displayed during PC scan, or when a network
feature does not work properly.

/MENU  

 

5 2 6  

  OK/SET

• The network status code is indicated.

*1

For 2-line LCD models only. (

)

000

Not connected

The unit is not connected correctly
to the network.

Check the connections (page 28).

110

Offline

IP address is not configured.

Configure the IP address.

112

Offline

IP address is not determined,
because the IP configuration is not
correct.

Correct the configuration of IP
address information.

Operating Instructions

129