Panasonic KXFC962FX Operating Guide
12. Help
93
12.3.6 Copying
12.3.7 Answering machine
The printing quality is
poor.
poor.
L
The thermal head is dirty. Clean it (page 97).
L
Adjust the print contrast using feature #59 (page 66).
L
If documents can be copied properly, the unit is working normally.
The other party may have sent a faint document or there may be
something wrong with the other party’s machine. Ask them to send
a clearer copy of the document or to check their fax machine.
The other party may have sent a faint document or there may be
something wrong with the other party’s machine. Ask them to send
a clearer copy of the document or to check their fax machine.
The other party complains
that they cannot send a
document.
that they cannot send a
document.
L
The receiving mode is set to TEL mode.
Receive the document manually (page 46) or change the receiving
mode to TAM/FAX mode (page 48) or FAX ONLY mode (page 49).
Receive the document manually (page 46) or change the receiving
mode to TAM/FAX mode (page 48) or FAX ONLY mode (page 49).
L
The memory is full of received documents due to a lack of
recording paper or a recording paper jam. Install paper (page 9) or
clear the jammed paper (page 95).
recording paper or a recording paper jam. Install paper (page 9) or
clear the jammed paper (page 95).
I cannot select the desired
receiving mode.
receiving mode.
L
If you want to set TAM/FAX or FAX ONLY mode, set the desired
mode using feature #77 (page 67), and press {AUTO ANSWER}
repeatedly to select the desired mode.
mode using feature #77 (page 67), and press {AUTO ANSWER}
repeatedly to select the desired mode.
L
If you want to set TEL mode or TEL/FAX mode, set the desired
mode using feature #73 (page 66), and press {AUTO ANSWER}
repeatedly to select TEL mode.
mode using feature #73 (page 66), and press {AUTO ANSWER}
repeatedly to select TEL mode.
L
The Distinctive Ring of feature #31 is activated (page 52).
When an extension
telephone is connected, I
cannot receive
documents by pressing
{*}{#}{
telephone is connected, I
cannot receive
documents by pressing
{*}{#}{
9}.
L
You must set remote fax activation to ON (feature #41 on page 65)
beforehand.
beforehand.
L
Press {*}{#}{9} firmly.
L
The memory is full of received documents due to a lack of
recording paper or a recording paper jam. Install paper (page 9) or
clear the jammed paper (page 95).
recording paper or a recording paper jam. Install paper (page 9) or
clear the jammed paper (page 95).
Problem
Cause & Solution
The unit will not make a
copy.
copy.
L
You cannot make a copy during programming.
L
You cannot make a copy during a telephone conversation.
A black line, a white line or
smudge appears on the
copied document.
smudge appears on the
copied document.
L
The scanner glass, white plate or rollers are dirty with correction
fluid, etc. Clean them (page 96). Please do not insert a document
before correction fluid has dried completely.
fluid, etc. Clean them (page 96). Please do not insert a document
before correction fluid has dried completely.
The copied document is
blank.
blank.
L
The recording paper is not installed correctly. Make sure that the
shiny side of the paper is facing down and re-install the paper
(page 9).
shiny side of the paper is facing down and re-install the paper
(page 9).
The copied image is
distorted.
distorted.
L
Adjust the width of the document guides to fit the actual size of the
document.
document.
The printing quality is
poor.
poor.
L
The thermal head is dirty. Clean it (page 97).
L
Adjust the print contrast using feature #59 (page 66).
Problem
Cause & Solution
The answering machine is
turned ON, but caller
messages are not
recorded.
turned ON, but caller
messages are not
recorded.
L
The recording time is set to “
GREET ONLY”. Select “1 MINUTE”
or “
3 MINUTES” (feature #10 on page 63).
L
The message memory is full. Erase unnecessary messages (page
56).
56).
Problem
Cause & Solution
FC962FX-PFQX2294ZA-en.book Page 93 Friday, August 26, 2005 9:05 PM