Panasonic KXFC235E Operating Guide
4. Telephone
42
L
Consult your service provider for more
information.
information.
1
Press {j/OK}.
2
Select “
SMS”, then press {>}.
3
Select “
Public”, then press {>}.
4
Select “
Settings”, then press {>}.
5
Enter “
0000” (default base unit PIN).
L
If you changed the PIN, enter it (page 80).
6
Select “
Message Centre1” or “Message
Centre2”, then press {>}.
7
Edit the number as necessary, then press
{j
{j
/OK}.
8
Select “
Save”, then press {>}.
9
Press {ih}.
Note:
L
If your phone is connected to a PBX, you
need to add the PBX line access number and
a dialling pause to the beginning of the
Message Centre 1 phone number.
need to add the PBX line access number and
a dialling pause to the beginning of the
Message Centre 1 phone number.
4.14 Registering
mailboxes
mailboxes
Each SMS mailbox you wish to use must be
registered with BT Text. There are two ways you
can register a mailbox:
–
registered with BT Text. There are two ways you
can register a mailbox:
–
Send an SMS message to another person.
–
Send the text message ‘REGISTER’ to
destination number 00000.
destination number 00000.
4.15 Sending a message
4.15.1 Writing and sending a new
message
message
1
Press {j/OK}.
2
Select “
SMS”, then press {>}.
3
To access the public mailbox
Select “
Select “
Public”, then press {>}.
To access a private mailbox
Select the desired mailbox, press {>}, then
enter its password.
Select the desired mailbox, press {>}, then
enter its password.
4
Select “
Create”, then press {>}.
L
If “^
Use Last Text?” is displayed, you
can use the text from the last message
you created by pressing {e}. This
message will be displayed only if the last
message was created using the same
mailbox you selected in step 3.
you created by pressing {e}. This
message will be displayed only if the last
message was created using the same
mailbox you selected in step 3.
5
Enter the message (page 47), then press
{j
{j
/OK}.
6
Enter the destination telephone number.
Manually:
Enter the number, up to 20 digits.
Using the handset phonebook:
1. Press {k}.
2. Press {e} or {v} repeatedly to display
the desired item.
L
You can also find an item using one of
the search methods on page 32.
the search methods on page 32.
3. Press {j/OK}.
Using the Caller ID list:
1. Press {e} or {v} repeatedly to select
the party.
2. Press {j/OK}.
Using the redial list:
1. Press {R} repeatedly to select the
telephone number.
2. Press {j/OK}.
7
If you wish to send the message to the other
party’s mailbox, enter the other party’s
mailbox number after the destination phone
number.
Example: The other party’s phone number
is 123456 and their mailbox number is 1.
Enter 1234561.
party’s mailbox, enter the other party’s
mailbox number after the destination phone
number.
Example: The other party’s phone number
is 123456 and their mailbox number is 1.
Enter 1234561.
L
To send the message to the public
mailbox, skip to step 8.
mailbox, skip to step 8.
8
Press {j/OK}.
9
To save the message, select “
Yes”, then
press {>}.
L
To send the message without saving it,
select “
select “
No”, then press {>}.
10
To send the message, select “
Send”, then
press {>}.
{ih}
{j
/OK}
{>}{e}{v}
{R}
{
C/T}
{k}
FC235E-PFQX2180YA_en.book Page 42 Monday, June 27, 2005 11:54 AM