Panasonic KXTG8561FX Operating Guide
R Power back-up mode will not work if the
battery level of the power supplying
handset is
handset is
/
.
R Do not lift the power supplying handset
from the base unit during power back-up
mode.
mode.
R Do not touch the handset’s charge contacts
during power back-up mode.
R If the battery level is low, the unit will not
work sufficiently during power back-up
mode. In addition, in case handset battery
power runs out, we recommend connecting
a corded-type telephone (without AC
adaptor) to the same telephone line or to
the same telephone line jack, if you have
such a telephone jack in your house.
mode. In addition, in case handset battery
power runs out, we recommend connecting
a corded-type telephone (without AC
adaptor) to the same telephone line or to
the same telephone line jack, if you have
such a telephone jack in your house.
R Calls cannot be made during a power
failure until key lock is turned off (page 20).
Panasonic Ni-MH battery
performance (supplied batteries)
during power back-up mode
performance (supplied batteries)
during power back-up mode
When the batteries are fully charged,
operating time of the handset in power
back-up mode varies depending on usage.
– Continuous use of the handset in power
operating time of the handset in power
back-up mode varies depending on usage.
– Continuous use of the handset in power
back-up mode: 2 hours max.
– Continuous use of the handset other than a
handset in power back-up mode: 3 hours
max.
max.
– Not in use in power back-up mode: 3 hours
max.
Note:
R Actual battery performance depends on
R Actual battery performance depends on
usage and ambient environment.
Making calls during a power
failure
failure
n
When only 1 handset is registered:
1
Lift the handset and dial the phone
number.
number.
2
Within 1 minute, place the handset on
the base unit.
R Wait until speakerphone is turned
the base unit.
R Wait until speakerphone is turned
on automatically and the call is
made.
made.
3
When the other party answers the call,
keep the handset on the base unit and
talk using the speakerphone.
keep the handset on the base unit and
talk using the speakerphone.
4
When you finish talking, press M
N.
Note:
R In step 2, if you do not place the handset on
R In step 2, if you do not place the handset on
the base unit within 1 minute, the power
back-up mode turns off. In this case, press
M
back-up mode turns off. In this case, press
M
N on the handset and dial the phone
number. Then try again from step 2.
n
When 2 or more handsets are registered:
You should leave one handset on the base
unit for supplying power, and use another
handset for making calls. For the operation,
please see “Making calls”, page 18.
You should leave one handset on the base
unit for supplying power, and use another
handset for making calls. For the operation,
please see “Making calls”, page 18.
Note:
R During a call with the handset placed on the
R During a call with the handset placed on the
base unit (power back-up mode), the call
may be disconnected if you touch the
handset. In such case, try to call back.
may be disconnected if you touch the
handset. In such case, try to call back.
R The range of the base unit is limited during
a power failure. Please use the handset
close to the base unit.
close to the base unit.
21
Making/Answering Calls
TG8551_61FX_(en-en)_0427_ver021.21 21
2012/04/27 20:24:45