Panasonic KXMB781 Operating Guide
2. Preparation
23
For assistance, please visit http://www.panasonic.com/help
L
If the unit is connected to your computer, the
model name will be automatically detected.
model name will be automatically detected.
L
You can change the name of the unit if necessary.
3. Click [Install], then follow the on-screen
instructions.
L
The files will be copied to your computer.
For LAN connection (KX-MB781 only):
1. [Connect via the Network.] i [Next]
L
The [Select a Network Device] dialog box will
appear.
appear.
2. Check [Select in the searched list] and select the
unit from the list.
L
If the name of the desired unit is not displayed on
the list, and the IP address for the unit has been
assigned, check [Direct input] and enter the IP
address.
the list, and the IP address for the unit has been
assigned, check [Direct input] and enter the IP
address.
3. [Next]
L
You can change the name of the unit if necessary.
4. Click [Install], then follow the on-screen
instructions.
L
The files will be copied to your computer.
To view or install the operating instructions in the
CD-ROM
CD-ROM
1. Start Windows and insert the included CD-ROM into
your CD-ROM drive.
2. Click [Operating Instructions], then follow the on-
screen instructions to view or install the operating
instructions in PDF format.
instructions in PDF format.
L
Adobe
®
Reader
®
is required to view them.
Note:
L
If the screen prompts to insert the CD-ROM for the
operating system when installing Multi-Function
Station, insert it into your CD-ROM drive.
operating system when installing Multi-Function
Station, insert it into your CD-ROM drive.
L
If you install the operating instructions, you can view
it anytime from [o] on the Multi-Function Station
launcher.
it anytime from [o] on the Multi-Function Station
launcher.
To use another unit with the computer
You need to add the printer driver for each unit, as
follows.
You need to add the printer driver for each unit, as
follows.
[
Start] i [All Programs] or [Programs] i
[
Panasonic] i the unit’s name i [Add Printer
Driver]. Then follow the on-screen instructions.
Note:
L
You cannot connect more than one unit to the same
computer at the same time.
computer at the same time.
To modify the software
You can select the components to install anytime after
the installation.
For Windows 2000, Windows XP and Windows Vista
users, you must be logged in as an administrator in order
to modify Multi-Function Station.
You can select the components to install anytime after
the installation.
For Windows 2000, Windows XP and Windows Vista
users, you must be logged in as an administrator in order
to modify Multi-Function Station.
1. Start Windows and insert the included CD-ROM into
your CD-ROM drive.
2. [Start] i [All Programs] or [Programs] i
[
Panasonic] i the unit’s name i [Uninstall or
Modify] i [Modify] i [Next]. Then follow the
on-screen instructions.
on-screen instructions.
To uninstall the software
For Windows 2000, Windows XP and Windows Vista
users, you must be logged in as an administrator in order
to uninstall Multi-Function Station.
For Windows 2000, Windows XP and Windows Vista
users, you must be logged in as an administrator in order
to uninstall Multi-Function Station.
1. [Start] i [All Programs] or [Programs] i
[
Panasonic] i the unit’s name i [Uninstall or
Modify]
2. [Uninstall] i [Next]. Then follow the on-screen
instructions.
Note:
L
If you want to uninstall each component, select
[
[
Modify] and click [Next] in step 2. Then follow the
on-screen instructions.
Important notice
If you use Windows XP or Windows Vista, a message
may appear after connecting the unit with the USB
cable. This is normal and the software will not cause
any difficulties with your operating system. You can
continue the installation with no problem. This kind of
message is displayed:
If you use Windows XP or Windows Vista, a message
may appear after connecting the unit with the USB
cable. This is normal and the software will not cause
any difficulties with your operating system. You can
continue the installation with no problem. This kind of
message is displayed:
L
For Windows XP users
“The software you are installing for this hardware
has not passed Windows Logo testing to verify its
compatibility with Windows XP.”
“The software you are installing for this hardware
has not passed Windows Logo testing to verify its
compatibility with Windows XP.”
L
For Windows Vista users
“Would you like to install this device software?”
“Would you like to install this device software?”