Panasonic S-ICX Manual

Page of 329
260
S-ICX (International) issued June 2000
S-ICX-45-700
Chapter 6. DSLT Features
Section 700 - Operation
Considerations
N/A
MCO Trunk Access
The System supports up to 5 MCO groups for each MCO tenant group. You can seize an idle trunk 
from the MCO trunk group by entering the MCO access code.
Operation
To seize an idle trunk:
Hardware Requirements
N/A
Considerations
The System supports up to 576 outside lines in a six-CCU configuration. These lines can be 
divided into 99 different trunk groups.
Each trunk group can support up to 50 outside lines.
Each MCO Tenant Group can have up to 5 MCO trunk access codes. System defaults for MCO 
trunk access codes are displayed in the following table.
MCO1 can have up to 5 trunk groups assigned by the Advanced Trunk Group feature.
MCO1 access code is used for Automatic Route Selection (ARS) access code.
Table 22. MCO Trunk Access Codes
Action
Result
1.   Lift the handset or press the ON/OFF key.
Intercom dial tone
2.   Enter the desired trunk access number (default = 9 [UK/
HK], 0 [Taiwan, Malaysia, Indonesia], or 81-84). (See 
Table 22.)
Outside dial tone
3.   Dial the phone number.
MCO Group
Trunk Access Code
MCO1
9 (UK/HK) or 0 (Taiwan, 
Malaysia, Indonesia)
MCO2
81
MCO3
82
MCO4
83
MCO5
84