Panasonic UF5600 Operating Guide
Loading Documents
45
Ba
sic
Operations
1. Be sure the document(s) is free of staples, paper clips and is not torn, greasy or covered by foreign objects.
2. Place the document(s) FACE UP on the Automatic Document Feeder (ADF) until the leading edge
2. Place the document(s) FACE UP on the Automatic Document Feeder (ADF) until the leading edge
inserted in the machine stops.
You can also stack up to 30 PAGES on the ADF at one time. If you are sending more than 30 pages of
the document(s), make sure that the bottom sheet of the document(s) enters first.
You can also stack up to 30 PAGES on the ADF at one time. If you are sending more than 30 pages of
the document(s), make sure that the bottom sheet of the document(s) enters first.
3. Adjust the Document Guides to center the document on the ADF.
When you set a document on the ADF, the display message will change from date and time (standby) to
the following message. You can now change basic transmission settings or begin the dialling procedure.
the following message. You can now change basic transmission settings or begin the dialling procedure.
ENTER STN(S)
THEN PRESS START
THEN PRESS START
NOTE
1. The document limitation to send multiple pages is as follows.
* Please note that although the size meets the specifications, you might not be able to set 30
pages with some types of paper. If you are sending more than 30 pages, limitation of
document size and thickness is A4 and 0.06 mm to 0.10 mm.
pages with some types of paper. If you are sending more than 30 pages, limitation of
document size and thickness is A4 and 0.06 mm to 0.10 mm.
2. If you send more than 30 pages, it is recommended to use the Job Build function. (See page
3. Transmitting documents longer than 356 mm requires user's assistance.
How to Load Documents
Document Size
Document Thickness
Up to 30 pages* A4 size
0.06 mm - 0.10 mm
Document Guides