Cisco 2811 ROUTER 2FE 1NME 4HWIC 2PVDM 2AIM IP BASE WITH A/C POWER SUPPLY Specification Guide

Installing and Upgrading Internal Modules in Cisco 2800 Series Routers

OL-5792-04

Installing the Chassis Cover

Installing the Cover on Cisco 2821 and Cisco 2851 Routers

To install the chassis cover on a Cisco 2821 or a Cisco 2851 router, follow these steps. A number 2
Phillips screw driver is required.

Step 1

Place the chassis on a flat surface.

Step 2

Hold the cover at a 45-degree angle, and insert the tabs into the slots along the front (bezel) edge of the
chassis. See

Step 3

Center the cover over the chassis and lower it onto the chassis.

Step 4

Install the three cover screws.

Figure 52

Installing Cover on Cisco 2821 and Cisco 2851 Routers

Insert tabs and center the cover

Close the cover

103964