Kenwood DDX375BT Owner's Manual
Notes on using an iPod/iPhone
• When operating an iPod/iPhone, some operations
• When operating an iPod/iPhone, some operations
may not be performed correctly or as intended. In
this case, visit the following KENWOOD web site:
<www.kenwood.com/cs/ce/>
this case, visit the following KENWOOD web site:
<www.kenwood.com/cs/ce/>
• When you turn on this unit, the iPod/iPhone is
charged through the unit.
• The text information may not be displayed correctly.
• For some iPod/iPhone models, the performance may
• For some iPod/iPhone models, the performance may
be abnormal or unstable during operation. In this
case, disconnect the iPod/iPhone device, then check
its condition.
case, disconnect the iPod/iPhone device, then check
its condition.
If the performance is not improved or slow, reset
your iPod/iPhone.
References
References
Troubleshooting
Troubleshooting
What appears to be trouble is not always serious.
Check the following points before calling a service
center.
• For operations with external components, refer also
Check the following points before calling a service
center.
• For operations with external components, refer also
to the instructions supplied with the adapters used
for connection (as well as the instructions supplied
with the external components).
for connection (as well as the instructions supplied
with the external components).
General
No sound comes out of the speakers.
A Adjust the volume to the optimum level.
A Check the cords and connections.
No picture is displayed on the screen.
A Turn on the screen. (Page 4)
The unit does not work at all.
A Reset the unit. (Page 4)
The remote controller* does not work.
A Replace the battery.
* For DDX395/DDX375BT/DDX350BT/DDX25BT: Purchase optional
remote controller, KNA-RCDV331.
“No Signal”/“No Video Signal” appears.
A Start playback on the external component
connected to the AV-IN input terminal.
A Check the cords and connections.
A Signal input is too weak.
“Miswiring DC Offset Error”/“Warning DC Offset
Error” appears.
Error” appears.
A A speaker cord has shorted or it has come into
contact with the car chassis. Wire or insulate the
speaker cord as appropriate, then reset the unit.
speaker cord as appropriate, then reset the unit.
“Parking off” appears.
A No playback picture is shown when the parking
brake is not engaged.
“Learning Process Failed” appears.
A Your steering remote controller is not compatible,
learning may not be completed. Consult your car
audio dealer for details.
audio dealer for details.
Discs
Recordable/Rewritable discs cannot be played back.
A Insert a finalized disc.
A Finalize the discs with the component which you
used for recording.
Tracks on the Recordable/Rewritable discs cannot
be skipped.
be skipped.
A Insert a finalized disc.
A Finalize the discs with the component which you
used for recording.
Playback does not start.
A The format of files is not supported by the unit.
No picture appears on the external monitor.
A Connect the video cord correctly.
A Select the correct input on the external monitor.
DivX*/MPEG1/MPEG2/MP3/WMA/WAV/AAC discs
cannot be played back.
cannot be played back.
A Record the tracks using a compatible application
on the appropriate discs. (Page 58)
A Add appropriate extension codes to the file names.
* Only for DDX418BT.
* Only for DDX418BT.
Tracks on the recordable/rewritable discs are not
played back as you have intended them to play.
played back as you have intended them to play.
A Playback order may differ from the one played back
using other players.
61
ENGLISH
EN_DDX2018ST_KR.indb 61
2017/05/17 9:28