Kenwood KMR-D372BT Owner's Manual
28
Default: XX
DISPLAY
COLOR
SELECT*
SELECT*
1
Select color for ALL ZONE, ZONE 1 and ZONE 2 separately.
1 Select a zone. (See the illustration on page 27.)
2 Select a color for the selected zone.
2 Select a color for the selected zone.
INITIAL COLOR/VARIABLE SCAN/CUSTOM R/G/B/preset colors*
2
Default:
/
/
/
: VARIABLE SCAN
: INITIAL COLOR
To make your own color, select [CUSTOM R/G/B]. The color you have
made will be stored in [CUSTOM R/G/B].
1 Press the volume knob to enter the detailed color adjustment.
2 Press
made will be stored in [CUSTOM R/G/B].
1 Press the volume knob to enter the detailed color adjustment.
2 Press
S / T to select the color (R/G/B) to adjust.
3 Turn the volume knob to adjust the level (0 to 9), then press the knob.
DIMMER
Dim the illumination.
ON: Dimmer is turned on. ; OFF: Cancels.
DIMMER TIME: Set the dimmer on and off time.
1 Turn the volume knob to adjust the [ON] time, then press the knob.
2 Turn the volume knob to adjust the [OFF] time, then press the knob.
(Default: [ON]: PM6:00 or 6:00PM; [OFF]: AM6:00 or 6:00AM)
ON: Dimmer is turned on. ; OFF: Cancels.
DIMMER TIME: Set the dimmer on and off time.
1 Turn the volume knob to adjust the [ON] time, then press the knob.
2 Turn the volume knob to adjust the [OFF] time, then press the knob.
(Default: [ON]: PM6:00 or 6:00PM; [OFF]: AM6:00 or 6:00AM)
BRIGHTNESS
1 Select a zone. (See the illustration on page 27.)
2 0 to 31: Select your preferred brightness level for the selected zone.
2 0 to 31: Select your preferred brightness level for the selected zone.
TEXT SCROLL
AUTO/ONCE: Select whether to scroll the display information
automatically, or scroll only once. ; OFF: Cancels.
automatically, or scroll only once. ; OFF: Cancels.
*
1
For
/
/
/
/
.
*
2
Preset colors: RED1/RED2/RED3/PURPLE1/PURPLE2/PURPLE3/PURPLE4/BLUE1/
BLUE2/BLUE3/SKYBLUE1/SKYBLUE2/LIGHTBLUE/AQUA1/AQUA2/GREEN1/
GREEN2/GREEN3/YELLOWGREEN1/YELLOWGREEN2/YELLOW/ORANGE1/
ORANGE2/ORANGERED
BLUE2/BLUE3/SKYBLUE1/SKYBLUE2/LIGHTBLUE/AQUA1/AQUA2/GREEN1/
GREEN2/GREEN3/YELLOWGREEN1/YELLOWGREEN2/YELLOW/ORANGE1/
ORANGE2/ORANGERED
You can control the unit with the steering remote control keys on your
vehicle. After connection, you can configure the control keys according to
your preference.
• You can only make this configuration if your vehicle is equipped with the
vehicle. After connection, you can configure the control keys according to
your preference.
• You can only make this configuration if your vehicle is equipped with the
electrical steering remote control.
• If the steering remote control in your car is not compatible, configuration
may not be completed and an error message may appear. ( 29)
Make the connection
Configure the control keys
1
Press
repeatedly to enter STANDBY.
2
Press the volume knob to enter [FUNCTION].
3
Turn the volume knob to select [SYSTEM], then press the knob.
4
Turn the volume knob to select [USER S.REMO], then press the knob.
5
Turn the volume knob to select [SET KEY], then press the knob.
A key list of 16 assignable keys appears.
• K## NONE: No function has been assigned.
6
Turn the volume knob to select any key from the key list to assign the
function, then press the knob.
function, then press the knob.
“PRESS KEY TO ASSIGN K##” appears.
Rear panel
Learning steering
remote input terminal
remote input terminal
Gray/red
Bright green/red
Purple/red
Steering remote
cable (supplied)
cable (supplied)
Connect to your
vehicle’s steering
remote harness.
Contact your
KENWOOD dealer
for details.
vehicle’s steering
remote harness.
Contact your
KENWOOD dealer
for details.
ENGLISH
DISPLAY SETTINGS
LEARNING STEERING REMOTE CONTROL
(for
)
JS_KWD_KDC_X302_KN_EN_7.indd 28
5/29/2017 8:52:17 AM