Kenwood KMR-D372BT Owner's Manual
ENGLISH
29
TROUBLESHOOTING
Symptom
Remedy
General
Sound cannot be heard.
• Adjust the volume to the optimum level.
• Check the cords and connections.
• Check the cords and connections.
“MISWIRING CHECK WIRING THEN PWR
ON” appears.
ON” appears.
Turn the power off, then check to be sure the terminals of
the speaker wires are insulated properly. Turn the power
on again.
the speaker wires are insulated properly. Turn the power
on again.
“PROTECTING SEND SERVICE” appears.
Send the unit to the nearest service center.
• Sound cannot be heard.
• The unit does not turn on.
• Information shown on the display is
• The unit does not turn on.
• Information shown on the display is
incorrect.
Clean the connectors. ( 32)
The unit does not work at all.
Reset the unit. ( 3)
(For
)
“SET ERROR”/“DEL ERROR”
Setting/deleting the remote control ID is unsuccessful.
Turn the power off, then turn on the power and
perform the operation again.( 6)
Turn the power off, then turn on the power and
perform the operation again.( 6)
(For
)
“ERROR”/”FAIL”
Your steering remote controller is not compatible,
learning may not be completed. Consult your car audio
dealer for details.
learning may not be completed. Consult your car audio
dealer for details.
Radio
• Radio reception is poor.
• Static noise while listening to the radio.
• Static noise while listening to the radio.
Connect the antenna firmly.
CD/USB/iPod
Disc cannot be ejected.
Press and hold
M to forcibly eject the disc. Be careful not
to drop the disc when it is ejected. If this does not solve
the problem, reset the unit. ( 3)
the problem, reset the unit. ( 3)
Noise is generated.
Skip to another track or change the disc.
Tracks do not play back as you intended
them to play.
them to play.
Playback order is determined when files are recorded.
“READING” keeps flashing.
Do not use too many hierarchical levels or folders.
Elapsed playing time is not correct.
This is caused by how the tracks are recorded.
“LOADING” appears when you enter
search mode by pressing
search mode by pressing
.
This unit is still preparing the iPod/iPhone music list. It
may take some time to load, try again later.
may take some time to load, try again later.
7
Press and hold any control keys on your steering remote
control which you want to assign.
control which you want to assign.
A list of key functions will appear on the display.
NONE (default)/MUTE/SEEK UP/SEEK DOWN/VOL UP/VOL DOWN/
MODE/ON HOOK/OFF HOOK/VOICE/ENTER
MODE/ON HOOK/OFF HOOK/VOICE/ENTER
8
Turn the volume knob to select a function to assign, then
press the knob.
press the knob.
The selected key function is assigned to the steering
remote control key you have selected in step 7.
remote control key you have selected in step 7.
The display returns to the key list as on step 5.
• K## (Function): When certain function has been assigned
to a key.
9
Repeat steps
6
,
7
and
8
to assign other control keys.
10
Press and hold
to exit.
To reassign the control keys
1
Press
repeatedly to enter STANDBY.
2
Press the volume knob to enter [FUNCTION].
3
Turn the volume knob to select [SYSTEM], then press the
knob.
knob.
4
Turn the volume knob to select [USER S.REMO], then press
the knob.
the knob.
5
Turn the volume knob to select [RESET KEY], then press the
knob.
knob.
6
Turn the volume knob to select [YES], then press the
knob.
knob.
All the control keys will be reset.
Selecting
[NO] will cancel the operation.
When [FACTORY RESET] is set to [YES] ( 5), it will also reset the
learning steering remote control.
learning steering remote control.
To return to the previous setting item, press
.
LEARNING STEERING REMOTE CONTROL
(for
)
JS_KWD_KDC_X302_KN_EN_7.indd 29
5/29/2017 8:52:17 AM