Yamaha YSP-2700 Digital Sound Projector Owner's Manual

PREPARATIONS

➤ a Installation

En

This unit reflects sound beams off of walls to create the surround sound effect. The position of this unit in relation to the listening position and walls is important to achieving the 
desired surround sound effects. Refer to pages 13 to 17 when installing the unit. When installing this unit on a rack behind which there is limited space, for example, it may be easier 
to connect external devices to this unit first. This will depend upon the installation location. See pages 24 to 27 for information regarding the connection of external devices.

❑

The center unit and subwoofer communicate wirelessly. Subwoofer performance may be affected if the subwoofer is placed on a metal rack, or if there is a metal plate between the 
subwoofer and the center unit. Use a wired connection to connect the subwoofer to the center unit if sounds are interrupted due to the installation condition (p. 29).

a

• Be sure to install the center unit on a large, stable stand where it does not fall subject to vibrations, such as from an earthquake, and where it is out of the reach of children.

• The subwoofer speaker is not magnetically shielded. Do not install hard disk drives or similar devices near the subwoofer.

• Do not stack the center unit and subwoofer directly on top of other playback devices, or vice versa. Heat and vibrations may result in damage or malfunction.

Center unit

* If the center unit will be installed on a TV stand, attach 

the center unit stands to increase its height. Position the 
center unit so that it does not obstruct the TV’s remote 
control sensor or signal transmitter for 3D glasses.

Subwoofer

• Install the unit in the center of the left and right walls.

• If the antenna is raised (p. 23), position the center unit so that 

the antenna does not obstruct the TV screen.

• Attach the stands if the center unit does not sit high enough 

• The center unit can be mounted on a wall using the optional 

Wall Mount Bracket SPM-K20 (p. 19). 

• The listening position (such as sofa, etc.) should be 

located at the front of the unit.

• The distance between the listening position and the 

unit should be more than 1.8 m (6 ft).

• To achieve desired surround sound effects, be 

sure that obstacles such as furniture may not 
obstruct the path of sound beams (p. 14).

• To prevent sound reflecting off of walls, angle 

the subwoofer slightly toward the center of the 
room.

• When installing the subwoofer on a rack, be 

sure the rack is strong enough to support the 
subwoofer and that it leaves sufficient space 
for heat discharge.