Yamaha YSP-5600 Digital Sound Projector Owner's Manual

NETWORKS

➤ Connecting to a network

En

To use a wired network connection, connect the unit to a router via an STP network 
cable (category 5 or higher straight cable; not supplied).

• If the unit is already connected to a wireless network and you would like to switch to a wired connection, 

change “Network” in the setup menu to “Wired”.

Connect the unit to a wireless router (access point).

The 

 indicator on the front panel glows when the unit is connected to a wireless 

network.

• You cannot use the wireless network connection simultaneously with the wired network connection (p. 51) 

or Wireless Direct (p. 58).

• If the unit and the wireless router (access point) are too far apart, the unit may not connect to a wireless 

router (access point). In such case, place them close to each other.

• If the unit will not be connected to a wireless router (access point), Wireless Direct (p. 58) can be used to 

connect the unit directly to a mobile device to control the unit using the HOME THEATER CONTROLLER 
(WLAN) app installed on that mobile device.

SYSTEM

CONNCETOR

AUX2

TV

OPTICAL

IN 1

(HDCP2.2)

IN 2

IN 3

IN 4

OUT

(ARC)

HDMI

IR-IN

IR-OUT

UPDATE ONLY

RS-232C

NETWORK

SUBWOOFER

OUT

R

L

AUX1

NETWORK

The unit (rear)

Internet

Network Attached Storage 

(NAS)

PC

Modem

Mobile device

Router

Network cable

The unit

Internet

Modem

Mobile device

Wireless router 
(access point)

Glows (green)