ONKYO PR-RZ5100 Owner's Manual
32
Rear Panel
1. COMPONENT VIDEO IN/OUT jacks: Transfer the video
signals of an AV component with a component video cable.
2. ZONE 2/ZONE 3 PRE/LINE OUT jacks: Output audio
signals with an analog audio cable to a pre-main
amplifier or a power amplifier in a separate room (ZONE
2/ZONE 3). (ÄP19, 20)
amplifier or a power amplifier in a separate room (ZONE
2/ZONE 3). (ÄP19, 20)
3. HDMI IN jacks: Transmit video signals and audio signals
with a HDMI cable connected to an AV component.
4. VIDEO IN jacks: Input the video signals from AV
components with an analog video cable.
5. AUDIO IN jacks: Input TV or AV component audio
signals with an analog audio cable.
6. GND terminal: The ground wire of the turntable is connected.
7. HDMI OUT jacks: Transmit video signals and audio
7. HDMI OUT jacks: Transmit video signals and audio
signals with a HDMI cable connected to a monitor such
as a TV or projector.
8. ETHERNET port: Connect to the network with an
Ethernet cable.
9. USB port: A USB storage device is connected so that music
files stored in it can be played. You can also supply power
(maximum 5V/1A) to USB devices with a USB cable.
(maximum 5V/1A) to USB devices with a USB cable.
10.DIGITAL IN OPTICAL/COAXIAL jacks: Input the digital
audio signals from TV or AV components with a digital
optical cable or digital coaxial cable.
optical cable or digital coaxial cable.
11. Wireless antenna: Used upright for Wi-Fi connection or
when using a BLUETOOTH enabled device. The
diagram shows the movable range for the wireless
antenna. Do not try to force it beyond this range
otherwise you may break it.
diagram shows the movable range for the wireless
antenna. Do not try to force it beyond this range
otherwise you may break it.
12.AC INLET: The supplied power cord is connected.
13.RS232 port: For connection to the home control system.
14.12V TRIGGER OUT jacks: Allows you to connect a
14.12V TRIGGER OUT jacks: Allows you to connect a
device with 12V trigger input jack to enable link operation
between the device and the unit.
between the device and the unit.
15.IR IN port: Allows you to connect a multiroom remote
control kit.
16.TUNER AM/FM 75Ω terminal: The supplied antennas
are connected.
17.PRE OUT (XLR) jacks: Use a balanced XLR cable to
connect the power amplifier or powered subwoofer. Up to
two powered subwoofers can be connected.
two powered subwoofers can be connected.
18.PRE OUT (RCA) jacks: Use an analog audio cable or
subwoofer cable to connect the power amplifier or
powered subwoofer. Up to two powered subwoofers can
be connected.
powered subwoofer. Up to two powered subwoofers can
be connected.
1
4
5
7
3
2
6
8
18
9
10
12
11
13
17
15
16
14
11