Rommelsbacher CT 2215/IN User Manual
26
• Make sure no water or steam may infi ltrate the appliance from below either.
• Never use abrasives, steel wool or sharp, scratchy objects.
• If there is any dirt visible in the area of the ventilation slots, it can be removed from the out-
• Never use abrasives, steel wool or sharp, scratchy objects.
• If there is any dirt visible in the area of the ventilation slots, it can be removed from the out-
side by means of a vacuum cleaner.
The electronic control features several internal monitoring functions. If an error occurs, the
power supply will be quit and an error code will appear on the display.
power supply will be quit and an error code will appear on the display.
Error code table:
E0
Overcurrent: The power consumption of the appliance exceeded the maximum allowable
15 Amps.
Self-help: Make sure the appliance is connected to the mains voltage indicated on the
rating label.
E1
Electronic control of low voltage: An error has occurred in an electronic circuit of the
appliance due to excessively low voltage (< 160 V~).
Self-help: Make sure the appliance is connected to the mains voltage indicated on the
rating label.
E2
Electronic control of excess voltage: An error has occurred in an electronic circuit of the
appliance due to excessively high voltage (> 270 V~).
Self-help: Make sure the appliance is connected to the mains voltage indicated on the
rating label.
E3
Control unit: An error has occurred on the IGBT control unit of the appliance.
Self-help: Not possible – the appliance must certainly be forwarded to the customer
service.
E4
Short circuit: A short circuit was caused in an electronic circuit of the appliance.
Self-help: Not possible – the appliance must certainly be forwarded to the customer
service.
E5
Overheating protection (“power level” mode): The temperature on the cooktop exceeds
the maximum allowable value of 200 °C during “power level” operating mode (e. g. due
to hot oil or fat, or an empty pot or any other metal object while appliance is switched on).
Self-help: Eliminate the cause of overheating. Once the cooktop has cooled, the appli-
ance can be put into operation again. Afterwards use the “temperature level” mode for
constantly higher temperatures over 200 °C.
E6
Temperature sensor: The temperature sensor underneath the glass ceramic plate is
defective.
Self-help: Not possible – the appliance must certainly be forwarded to the customer
service.
Error codes