Atech OEM Inc. WM100X User Manual
iWEM-1000UM, Dec 30, 2010
Atech Technology Co., Ltd.
7F, AAEON Building, No.43, Sec. 4, Keelung Rd, Taipei City 10607, Taiwan (R.O.C.)
Tel: +886-2-2377-0282
Fax: +886-2-2377-0283
http://www.atechoem.com/
set_passwd wep104
<key#> <password>
set_passwd
wep104 <key#>
<password>
Select WEP40 key number, and set WEP keys.
key# = 1 to 4.
password = xx xx xx xx xx xx xx xx xx xx xx xx xx; x=0 to f.
set_passwd wpa
<password>
WPAv1 & WPAv2
Key: <password>
<CR>
Set the WPA passwords. The length of the WPA password
must be shorter than 64.
set_passwd key
<key#>
WEP40 key <key#>
active<CR>
or
WEP104 key <key#>
active<CR>
Set key number used for WEP40 or WEP104. The
response depends on the selected WEP mode.
key# = 1 to 4.
Default = 1
4.4.2. Network
Network commands are for the users to set the DHCP mode, IP address and all essential IP network
parameters. The Network commands also cover serial port device server settings.
Command
Response
Action and Notes
set_dhcp <state>
OK<CR>
Enable/Disable DHCP
state = 0, disable
state = 1, enable
Default = 1
set_host
<host_IP_addr>
OK<CR>
Set remote TCP server host IP address
Default = 192.168.0.100
set_remote_port
<remote_port>
OK<CR>
Set remote TCP server listening port
remote_port = 0 to 65535
Default = 2000
set_local_port
<local_port>
OK<CR>
Set local TCP server listening port. This setting
local_port = 0 to 65535
Default = 1000
set_ip
<local_IP_addr>
OK<CR>
Set local IP address
Default = 0.0.0.0
set_netmask
<netmask>
OK<CR>
Set local netmask
Default = 255.255.255.0
set_gateway
<GW_IP_addr>
OK<CR>
Set Gateway IP address
Default = 0.0.0.0