Landis+Gyr Technology Inc. ER6R1S4 User Manual
Draft
Landis+Gyr
Chapter 5 - Managing Endpoints
User Guide
98-1723 Rev AB
41
4. Choose the desired setting for each event. See below for setting descriptions.
NOTE: NOTE: The default Alarm Definition settings represent the recommendation of Landis+Gyr.
5. Click the Save button.
An Alarm Definition can only be edited if it is not already part of an existing Configuration Group.
Cellular Residential Network Settings
The Cellular Residential Network Settings, shown in Figure 5 - 6, establish organization level set-
tings for outage wait values, time synchronization, etc. The Cellular Residential Network Settings
are a part of the endpoint configuration and may be modified.
tings for outage wait values, time synchronization, etc. The Cellular Residential Network Settings
are a part of the endpoint configuration and may be modified.
Figure 5 - 6. Cellular Residential Network Settings
Customizing Cellular Configuration
Following is the procedure for creating a new Cellular Configuration Group
1. From Command Center home, select Setup > Groups > Configuration Groups > Cellular
Residential. The Cellular Residential Configuration Groups window will open, shown below
in Figure 5 - 7.
in Figure 5 - 7.
Table 5-1.
Available Settings
Result
Disabled
Log Only
Advisory
Alarm
Ev
ent is:
Logged in module
Available via request
Included in next scheduled
Transmitted immediately
Flagged on Dashboard
Included in E-mail Alerts