Landis+Gyr Technology Inc. ER6R1S4 User Manual

Draft

Landis+Gyr

Chapter 5 - Managing Endpoints 

User Guide

98-1723 Rev AB

43

Delay. Select the Delay check box to allow the endpoint to take a reading, but cache the 
result for transmission at a different time.

Repeat step 5 for any additional commands. The endpoint has the ability to store twelve scheduled 
commands.

6. Network Setting. Select the desired Network Settings group from the drop down box. Refer to 

Network Settings for Network Settings configuration.

7. Alarm Definition. Select the desired alarm definition from the drop down list box. Refer to 

Alarm Definitions for Alarm Definitions configuration.

8. Click Save to save the new configuration group.

The Add Meters to Group screen allows a user to add a meter, or group of meters, by entering the 
meter number(s) or importing a formatted meter file. 

Following is the procedure for adding meters to a configuration group:

1. From Command Center Home, select Setup > Groups > Endpoint Configuration Groups > 

Cellular Residential. The Cellular Meter Configuration Groups window will open.

2. Select the Add Meters icon for the desired configuration group. The Add Meters to Group 

window opens, shown in Figure 5 - 9.

3. Select the Meter Number radio button and enter the appropriate meter number(s). Meter 

numbers should be separated by commas, spaces or semi-colons.

Select the Meter File radio button and enter the path to the meter file or select browse to 
navigate to the file.

4. Select Add to save changes.

The Cellular Reconfiguration process is the process by which Command Center issues reconfigura-
tion commands to modules that have recently been added to a new Configuration Group or User