RadioFrame Networks Inc MCSERIESMP User Manual

MC-Series System Installation & Testing 

RadioFrame Networks, Inc.

 

a.  Procure all non-RFN hardware. Refer to Nextel documentation for procurement of iSC-3s, 

EAS, and CSU. 

b.  Procure the materials identified in 3.1 required by Nextel technicians to complete the 

installation. 

c.  Initiate the contracts necessary to engage outside contractors to complete the installation 

work necessary, including any design or engineering work necessary for seismic areas. As 
noted previously, any installation requiring seismic certification requires a formal design and 
installation package from an architect skilled in this area. 

d.  Follow standard Nextel RF Operations and Site Development procedures for scheduling (a) 

all installation activity and (b) all necessary datafill work. 

 

Planning should now be complete for the following tasks:  

•  Securing the MC-Series System cabinet to the mounting surface 
•  Installing AC or DC power cabling and DC powerplant 
• Installing 

grounding 

• Installing 

T1 

cabling 

•  Installing a GPS antenna system 
•  Installing facility alarms 
• Adding 

HVAC 

 

RadioFrame Networks provides the following materials in an installation kit shipped with the  
MC-Series System: 

 

2 

GPS surge arrestors, 2.4 GHz bulkhead N-type, inline 

TOR 

2 

RG58/U, 1 meter coax cable, BNC M to BNC M 

BIC to iSC 

2 

LMR-195-PVC, 84” cable, N-type 

iSC to GPS at TOR 

20 

10/32 Philips thread cutting screw 

mounting non-RFN HW in rack 

4 

Lifting eyelet bolt 

cabinet installation 

1 

Non-disposable ESD wrist strap 

ESD prevention 

1 

Cabinet manufacturer’s installation manual 

mounting cabinet 

4 

SMA terminators 

spares for RF shelf reconfigurations