Netgear 05200007 User Manual
NETGEAR ProSafe VPN Client to NETGEAR FVS318 or FVM318 VPN Routers
C-1
202-10015-01
Appendix C
NETGEAR ProSafe VPN Client
to NETGEAR FVS318 or FVM318 VPN Routers
Follow these procedures to configure a VPN tunnel from a NETGEAR ProSafe VPN Client to an
FVS318 or FVM318. This document follows the VPN Consortium interoperability guidelines. The
configuration options and screens for the FVS318 and FVM318 are the same.
FVS318 or FVM318. This document follows the VPN Consortium interoperability guidelines. The
configuration options and screens for the FVS318 and FVM318 are the same.
Configuration Summary
The configuration in this document follows the addressing and configuration mechanics defined
by the VPN Consortium. Gather all the necessary information before you begin the configuration
process. Verify whether the firmware is up to date, all of the addresses that will be necessary, and
all of the parameters that need to be set on both sides. Assure that there are no firewall restrictions.
by the VPN Consortium. Gather all the necessary information before you begin the configuration
process. Verify whether the firmware is up to date, all of the addresses that will be necessary, and
all of the parameters that need to be set on both sides. Assure that there are no firewall restrictions.
Table C-1.
Configuration Summary
VPN Consortium Scenario:
Scenario 1
Type of VPN
PC/Client-to-Gateway
Security Scheme:
IKE with Preshared Secret/Key (not Certificate-based)
Date Tested:
November 2003
Model/Firmware Tested:
Gateway
FVS318 firmware version 2.2 or FVM318 firmware version 1.1
Client
NETGEAR ProSafe VPN Client v10.1
IP Addressing:
Gateway Fully
Qualified Domain Name (FQDN)
Client Dynamic