Netgear 05200007 User Manual

NETGEAR ProSafe VPN Client to NETGEAR FVS318 or FVM318 VPN Routers

C-3

In this example, gateway A is configured using an example FQDN provided by a DDNS Service 
provider. In this case we established the hostname FVSrouter.dyndns.org for gateway A using 
the DynDNS service. Client B will use the host name registered with the DDNS Service Provider 
for gateway A when establishing a VPN tunnel. 

In order to establish VPN connectivity, client B must be configured to use a DNS hostname 
provided by the Gateway A DDNS Service Provider. The following step-by-step procedures 
assume that you have already registered with a DDNS Service Provider and have the configuration 
information necessary to set up the gateway and client.

1.

Log in to the FVS318 gateway as in the illustration.

Out of the box, the FVS318 or FVM318 is set for its default LAN address of 

 with its default user name of 

 and default password of 

. 

 

 
For this example we will assume you set the local LAN address as 10.5.6.1 for the FVS318.

2.

Click on the VPN Settings link on the left side of the main menu. 

–

For a FVS318: Click the radio button of the first available VPN tunnel. Click the Edit 
button below. This will take you to the VPN Settings – Main Mode Menu.

–

For a FVM318: Click Add. This will take you to the VPN Settings – Main Mode Menu.

DynDNS

www.dyndns.org

TZO.com

netgear.tzo.com

ngDDNS

ngddns.iego.net

Note: Product updates are available on the NETGEAR Web  site at 

 

. VPNC Interoperability guidelines can be found at 

 

.