Schulte-Schlagbaum AG SOT02 User Manual
SAG
SAFE-O-TRONIC
Installation
Schulte- Schlagbaum AG
Page 6 of 14
SOT-manual.DOC
3. Installation
Installing:
The electronic cabinet lock SAFE-O-TRONIC is attached on the inside of a cabinet door
using four screws.
using four screws.
Start-up:
Once the installation work is complete and all the locks tested, they are configured ac-
cording the star-up procedure.
cording the star-up procedure.
Applying the reference plate:
Stick the user reference plate only to a flat, grease- and dust-free surface.
4. Start-up procedure
The following Start-up procedure is recommended.
4.1. Function testing with the "TestKey"
Lock SAFE-O-TRONIC:
1. Activate SAFE-O-TRONIC (push rotary knob)
2. Hold TestKey directly in front of the rotary knob.
2. Hold TestKey directly in front of the rotary knob.
3. When the green LED flashes, turn knob 90
°
.
Unlock the SAFE-O-TRONIC:
1. Activate SAFE-O-TRONIC (push rotary knob)
2 Hold TestKey directly in front of the rotary knob.
3. SAFE-O-TRONIC unlocks itself.
2 Hold TestKey directly in front of the rotary knob.
3. SAFE-O-TRONIC unlocks itself.
NOTE:
The TestKey is used to test the function of factory-new or non-configured SAFE-O-
The TestKey is used to test the function of factory-new or non-configured SAFE-O-
TRONIC. Once the SetupKey has been used to configure the SAFE-O-TRONIC for
the system, the SAFE-O-TRONIC can no longer be locked or unlocked using the
TestKey!