Tagsys S.A. LSP3CLEAR-L40 User Manual
December 2009
Revision 2.1
21/68
4.2 L-SP3 RFID System Components
The components included in the L-SP3 RFID System package are listed in
Table 1
Table 1: L-SP3 System Components
Quantity
Description
1
L-SP3 Pedestal
8
40 mm Philips-head, countersunk screws with a diameter of 6 mm
1
2 ways 3.81mm Green Screw Tightening Plugs Vertical Cable Entry for
Synchronization Cable
Synchronization Cable
1
4 ways 3.81mm Green Push-On Plugs Vertical Cable Entry for I/O Wiring
4.3 L-SP3 Pedestal
4.3.1 Tools Required
The following tools are required during installation:
Measuring Tape
Square
Hand Drilling Machine with 4 mm, 8-mm and 19-mm drilling bits
Philips-head screwdriver
Spirit Level
Square
Hand Drilling Machine with 4 mm, 8-mm and 19-mm drilling bits
Philips-head screwdriver
Spirit Level
4.3.2 Placement of Pedestals
Pedestals must be mounted between 800mm and 980 mm apart (edge to edge) for
maximum reliable performance. There should be at least one pair of pedestals at each
entrance/exit point of the library. There should be a pedestal at each edge of the entrance, and a
clear space of at least 500 mm around the edge of the pedestals to ensure that the antennas will
not be detuned. This clear space must not contain any metallic objects, but may contain some
substrates such as non-metallic/non-conductive building materials such as wood, glass,
chipboards and plasterboards.
entrance/exit point of the library. There should be a pedestal at each edge of the entrance, and a
clear space of at least 500 mm around the edge of the pedestals to ensure that the antennas will
not be detuned. This clear space must not contain any metallic objects, but may contain some
substrates such as non-metallic/non-conductive building materials such as wood, glass,
chipboards and plasterboards.
Be cautious to properly align the pedestal in order to centre the photoelectric beam sensor on the
reflector of the next pedestal.
reflector of the next pedestal.
CAUTION: This equipment is intended for indoor use only under the
conditions described in this document. Should it be used outside these
conditions cannot be guaranteed, and is not recommended. Please read
section
conditions described in this document. Should it be used outside these
conditions cannot be guaranteed, and is not recommended. Please read
section
1
“
Publishing Information
” before installation or use.
CAUTION: In case several Pedestal rows (group of Pedestals) to be
installed it is mandatory every L-SP3 being positioned in the same
direction (all people counter of each looking toward the same direction).
This would prepare the installation for future implementation of direction
sensing.
installed it is mandatory every L-SP3 being positioned in the same
direction (all people counter of each looking toward the same direction).
This would prepare the installation for future implementation of direction
sensing.