Tagsys S.A. WIFILIBINVREAD User Manual
WiFi Inventory Reader
To recharge the pack, connect the battery charger to the battery pack connector as shown in the
picture below.
picture below.
Figure 3: Connecting the battery charger
Follow the instructions supplied with the battery charger to verify that the pack is completely
recharged.
recharged.
Only use the charger supplied with the reader or a compatible NiMH battery charger
capable of correctly recharging 10 battery cells.
capable of correctly recharging 10 battery cells.
The maximum capacity of the batteries is reached after several charge/discharge cycles.
4.2 WiFi Communication Interface
The embedded WiFi module is the DigiConnect Wi-ME. Any information on this module is available
on the CDROM in the directory “\DigiConnect IntegrationKit\Documentation” or on the DigiConnect
WEB pages at “
on the CDROM in the directory “\DigiConnect IntegrationKit\Documentation” or on the DigiConnect
WEB pages at “
Please read the DigiConnect User’s Guide to have an overview of the module characteristics.
The following explanations will give you the first steps to run the reader. Advanced functionalities
can be found in the DigiConnect User’s Guide.
The following explanations will give you the first steps to run the reader. Advanced functionalities
can be found in the DigiConnect User’s Guide.
June 2007
Revision 1.1c
15/36