Data Critical Corporation AVTS1010 User Manual

AlarmView™ System User’s Guide 
 
 

 
{insert part #} Page 29 
 

3. Press and hold transmitter On/Off button until an All Pagers 

confirmation message is received at pagers (approximately 5 
seconds). 

 

Bed: 1234 
 
Programming OK 
 
All Pagers 

 
 

Programming New Data into Transmitter 
 
Bed number and pager assignment changes made in the 
previous steps should now be programmed into the transmitter. 
 

!

!

!

!

!

!

 

 

 

 

 

 

Once data has been retrieved for a transmitter, it is easiest to 
change all values for that transmitter before sending changes 
back to transmitter. 

 

1. Aim infrared port on programmer directly at infrared port on 

front of transmitter and tap SEND button. Programmer will 
display “Sending Program Data” status message. 

 

 

2. When transmitter has been successfully programmed, 

programmer will display a “Programming Successful” status 
message. 

 

 

3. Tap Exit button (< in upper right corner) to return to SysMgr.