Data Critical Corporation AVTS1010 User Manual

AlarmView™ System User’s Guide 
 
 

 
{insert part #} Page 39 
 

 
Turn on all transmitters, and ensure they are not communicating with 
monitors. When the transmitter you are testing sends a survey page, 
the other transmitters’ Mode LEDs should flash Amber. This should 
be seen at regular intervals as the survey page continues. 

 
If no dead spots are discovered and the transmitters can detect each 
other, the transmitter range test is complete. Contact Data Critical Corp. 
if dead spots present a problem in functioning of care unit. 
 
 

 
 

 
 
Transmitter 
 
At least every two years, the transmitter’s internal battery should 
be tested. To check transmitter battery performance: 
 
{Placeholder for procedure to test battery performance from LL} 
 
 
Programmer 
 
To recharge programmer main battery pack and replace 
programmer backup battery, refer to Appendix B: Basic 
Programmer Functions in AlarmView System User’s Guide. 
 

If main battery warning message is displayed, recharge main battery 
as soon as possible. If both backup battery and main batteries are 
depleted programmer software and data will be lost. 

 
 

Pager