Humax C41-500 User Manual
104
DIRECTV
®
HD
DVR
RECEIVER
USER
GUIDE
RUN THE SYSTEM TEST
The System Test allows you to run a basic diagnostics check on your DVR.
First make sure that:
All connections — jacks, cables, etc. — are in place correctly. See Appendix 2, “Connections for TV and Equipment” for
more information.
There are batteries in the remote control and they are working correctly.
The access card is inserted in the DIRECTV
The access card is inserted in the DIRECTV
®
Receiver.
Follow these steps to run the diagnostics system test on your DVR:
Turn on your TV and the DVR.
Slide the mode switch to the DIRECTV position, then press MENU.
Slide the mode switch to the DIRECTV position, then press MENU.
Select “Settings & Help”.
4. Select “Settings” then “Info & Test”.
If you have a High-Definition DVR, select “Run System Test”.
If your system does not pass the System Test, check any of these potential trouble areas: cabling, pointing the satellite dish,
If your system does not pass the System Test, check any of these potential trouble areas: cabling, pointing the satellite dish,
phone connection and access card.
If you continue to have problems, call DIRECTV Customer Service at 1.800.531.5000.
You should run a system test several times before concluding that there is a problem. Occasional fluctuations in the phone
line or satellite signal can give temporary false readings.