JTECH Communications Inc. SERIES2600 User Manual

 

             Page 12 

 
During normal operations, if the Glowster charging indicator lights continue to 
flash the single-flash heartbeat indication while on the charging rack, it is likely 
that the charging rack is not getting enough power from the power adapter.  
Ensure that the JTECH power adapter is properly connected to the charging 
rack.  After having previously confirmed the power adapter connection, if after 60 
minutes the heartbeat indicator lights continue flashing while the Glowsters are 
on the charging rack, contact JTECH Customer Care. 
 
Warning: Never remove a Glowster or Patient Pager from the charging rack and 
distribute it to a guest or patient while the ‘double flash’ minimum charge 
indicator light is flashing, as it is possible that the unit will not function while in the 
hands of your customer due to insufficient power. 
 
Glowster Pager Operation 
Prior to the initial use of the system, place all pagers on the Charger Rack     
(Fig. 7) for a minimum of 24 hours to fully charge the rechargeable battery pack.  
This will also initialize the Glowsters which are shipped in “sleep mode” to 
preserve battery life.  (The contact with the charging base or a Glowster stack will 
initialize the Glowsters.)  When not in use, Glowsters should always be stored on 
the charging rack.  When placed on the rack, Glowster pagers will display a solid 
red charging light, although the pagers will no longer respond to transmissions 
from the master transmitter. 
  

 

 

Fig. 7 – Glowster Pagers on 4-stack Charger Rack 

 

Upon removal from the charging rack, after a three (3)-second delay, the 
Glowster pagers will respond with a short demo page, followed by a “heart beat” 
indicator light which will flash briefly every 3 seconds indicating that the pager is 
operator to easily preview the normal alert to the guest, patient or customer.