JTECH Communications Inc. SERIES2600 User Manual

 

             Page 14 

Glowster Promoback Installation/Removal 
Field installation of Glowster promoback option (Fig. 8): 
 

1.  Remove promoback screw. 
2.  Place the promoback over the alignment boss (upper left of the pager.) 
3.  Rotate the promoback clockwise until it snaps into place. 
4.  Reinstall promoback screw. 

 

 

 

Fig. 8 – Installing Glowster Promoback Option 

 
Glowster Charger Rack  
The Charger Rack is a multi-functional base unit on which the Glowster pagers 
are stacked and stored for convenient usage (Fig. 9), as well as charging.   When 
placed on the rack, Glowsters no longer receive or respond to transmissions from 
the master transmitter. The 1-stack and 4-stack rack options support a maximum 
of 15 and 60 Glowster pagers respectively, with15 Glowsters per stack. 
   

       

           

 

 

 

    Fig. 9 – Glowster Charger Rack 

        Fig. 10 – Wooden Storage Rack 

 

A wooden storage rack option is also available for both the 1-stack and the 4-
stack charger racks to assist in management and storage of the Glowster pagers 
(Fig. 10.)  The wooden rack is designed to include the charger rack and up to 60 
Glowster pagers (4 stacks of 15) configured with or without the optional pager 
promoback attachment. 
 
Care and Maintenance 
Wipe vibe/flash pagers with a soft cloth moistened with mild soap and water. 
Never spray liquids (cleaning solution or water) directly on the pagers.