JTECH Communications Inc. SERIES2600 User Manual
JTECH UHF Desktop Transmitter Installation and Operation Guide 320115K
Page 25
Paging using the Telephone Interconnect
Paging a Single Pager using the Telephone Interconnect
1. Pick up the receiver, listen for the dial tone, and dial the system extension
that has been assigned to the Paging System. A beep indicates the system is
ready for you to enter the pager number.
ready for you to enter the pager number.
2. Within 20 seconds, press the number of the pager (up to four digits) you wish
to page, using the telephone keypad.
3. For a RapidCall vibe/tone or Glowster only pager, press the # key next to
send the vibration/tone or Glowster page. For a numeric page, enter the
pager number up to four digits followed by the * key, and then enter an
optional message up to 16 digits followed by the # key. A beep is heard
verifying the message was sent. If the numeric message is exactly 16 digits,
a beep is heard once the 16th digit is entered.
pager number up to four digits followed by the * key, and then enter an
optional message up to 16 digits followed by the # key. A beep is heard
verifying the message was sent. If the numeric message is exactly 16 digits,
a beep is heard once the 16th digit is entered.
4. Hang up the receiver.
Group Paging Using the Telephone Interconnect
1. Pick up the receiver, listen for the dial tone, and dial any of the system
extensions that have been assigned to the Paging System. You will hear a
single beep indicating the system is ready for you to enter the group number.
single beep indicating the system is ready for you to enter the group number.
2. Within 20 seconds press the * key followed by the number of the group (1-99)
you wish to page using the telephone keypad.
3. Press the * key again to continue with a numeric message or press the # key
to transmit without a message.
4. Enter an optional message of up to 16 digits. If the message is less than 16
characters, press the # key on the phone keypad to indicate the end of the
message and send the page. A beep is heard verifying the message was
sent. If the message is exactly 16 digits, a beep is heard once the 16th digit
is entered.
message and send the page. A beep is heard verifying the message was
sent. If the message is exactly 16 digits, a beep is heard once the 16th digit
is entered.
5. Hang up the receiver.